Search results

  1. Beat_Up_Micra

    How to measure timing chain tensioner

    Just wanting advise on how to gain access to the timing chain tensioner so I can measure it. I know there is a cover on that side of the engine which needs to be removed, but what else has to come off first? Airbox and headlight I assume? What else? Rocker cover doesn't have to come off, does...
  2. Beat_Up_Micra

    Codes...Help!

    So in my panic and haste I posted this thread without doing much research into the possible causes etc. After some looking I'm thinking it may all be down to a worn timing chain. Does that sound about right to anyone? Car is '03 and has no history, but I assumed if it hadn't already had the...
  3. Beat_Up_Micra

    Codes...Help!

    Hi there! So the other day on a long trip (one of many recently) the check engine light came on. I bought a cheap diagnostic tool/code reader off eBay and it actually works (impressed). It shows these 4 codes... P0340 - Description: Crankshaft Position Sensor A Bank 1 Circuit Malfunction...
  4. Beat_Up_Micra

    Fox Performance Exhaust System

    Thanks for your input raptor... Yep, I agree with what you've said, like I said above I wasn't seriously considering buying it as it's pricey. Had been considering what you said prior to finding that system, just getting universal back box, cutting old off and welding new on the old pipe. Only...
  5. Beat_Up_Micra

    Fox Performance Exhaust System

    Hi! Upon browsing eBay I came across this... http://www.ebay.co.uk/itm/FOX-Complete-System-Catalyst-From-Nissan-Micra-K12-1x90-mm-/351292629944?hash=item51caac23b8 And am tempted by it. Has anyone here got this system or know whether it's any good? It's expensive (for me) so doubt I'll...
  6. Beat_Up_Micra

    Horn not working

    Have you checked the wires/connectors on the horn itself? The horn on our micra didn't work, replaced the fuse (still didn't work) and listened for the relay 'click' sound when pressing the horn, which it did so knew the relay was ok. Checked the horn itself/wires, noticed the wires had snapped...
  7. Beat_Up_Micra

    Exhust and remap

    You've got me wanting to chop the cat off my exhaust now! Just wondering, have you had an mot since doing so with yours? I'd just be worried about failing on emissions.
  8. Beat_Up_Micra

    Loss Of Power With Headlights On (K12 1.2 '03)

    Update! So it was caused by the passenger side brake bulb being of the wrong fitment! Halfords' fault! I had replaced a while back the top brake bulb in the rear window, the flip chart in Halfords stated that the central brake bulb was the same as the side ones (382), so I had that one new bulb...
  9. Beat_Up_Micra

    Loss Of Power With Headlights On (K12 1.2 '03)

    Thanks for the reply Frank and for posting those threads, guess I should've used the search feature on here. Definately sounds like we have the same problem with our Micra, so I'll check all the rear bulbs etc. Thinking about it, this problem came about after the passenger side brake bulb went...
  10. Beat_Up_Micra

    Loss Of Power With Headlights On (K12 1.2 '03)

    Hi There, Hope Someone Can Help... So my girlfriends K12 has developed an issue. When headlights are on the car loses power, moving off from traffic lights even on flat is a major struggle, and gaining speed takes ages and it will not go over 50mph even with your foot to the floor. It's a good...
  11. Beat_Up_Micra

    K12 Jacking & Support Points

    Thanks very much for the advice :) Will be putting in to action tomorrow when fitting new discs and pads.
  12. Beat_Up_Micra

    K12 Jacking & Support Points

    Thanks for the reply. So you put the stands under the sill also, or chassis legs? If sill, it's okay then I assume that the stand will not be right under the V and slightly rearward of it? (Due to the jack being there to lift in the first place). With the rear, is either of my suggested...
  13. Beat_Up_Micra

    Front Disc Torx Bolt & Tip On K&N Kit

    Since not heard anything back, decided to just go ahead and buy a set of Torx sockets, was cheap enough off of amazon with free next day delivery! Just hope the set includes the right size! Will be well pleased when new brakes are fitted! Here's the gear: Brembo pads (Amazon £17 - Free P&P)...
  14. Beat_Up_Micra

    K12 Jacking & Support Points

    Hi. Just wondering where people jack up their micra's using a trolley jack and where is best to put the axle stands? Haynes manual says front subframe and rear axle for jacking, sill support points for stands. I've used the front subframe before but it doesn't seem wise, nor safe, I don't like...
  15. Beat_Up_Micra

    Front Disc Torx Bolt & Tip On K&N Kit

    Hi. New member here, although I've viewed the site quite a bit looking for info. I'm planning on replacing the brake discs (and pads) on my girlfriends K12 and wanted to know beforehand, what size torx bit I'll need to remove the disc? I have none so need to buy beforehand. On another subject...
Back
Top