Search results

You want a good one?? Haha

So turns out she's gona have to go! It's current on 94,000, ideally was looking for about 900 as is, with the minilites, seats, subwoofer and Bluetooth radio

Hi guys. unfortunately I may need to sell my K11, however it is not set in stone as of yet.. So was just gona see if anyone would be interested and what they would offer? Mine is on the left in the first two photos and on the right in the 3rd. It is the 1.3 engine and box, 1.6 air box with...

so the ECU doesn't have this feature then? thanks for clarifying :)

hold big bottles of drinks?

not entirely sure wether it applies to the ecu on these micras (maybe someone with a bit more knowledge can clarify this). But when the engine is in over run, i.e no throttle being applied and car still moving in gear, so basically allowing engine braking.. there is very little to no fuel being...

iv just seen this now! I'm in swansea, let me know when you plan on meeting next!

Hi guys! I'm after a tow bar for my k11 ! so if any of you have 1 lying around or fitted to your car but don't use it, let me know! :D

Pictures didn't come out to bad :p

Just wondering if anyone is near South Wales to want to go to cruise swansea (which is actually in Carmarthen) Will be a big meet up with hundreds of modified cars from bentleys to corsas. Will be on the 6th July do was just wondering if anyone fancied it!

hmm.. you've got me tempted now, but i like the look of slotted disks :(

do they squeal like piggys when cold? and don't they need to be a certain temp to work effectively? or is the operating temperature reasonably low on the green ones? not too sure on the order of colours with the ebc stuff pads :)

Yeah stock power... For now... Planning on increasing the compression soon :) Got the ga16 air box on it and the Peter Lloyd rally exhaust on it too... And I do drive her pretty hard as I'm a pizza delivery boy haha

Anyone have any experience or thoughts on these brembo disks and pads? http://www.ebay.co.uk/itm/300663992292?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 http://www.ebay.co.uk/itm/331116709176?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 Worthy purchase over the stock pads and...

iv been idle for a while now, time to get things going again! hopefully within the next 2 weeks i'll get cracking with the high comp engine, but thought while I'm at it i may as well do a engine and gearbox swap in one, that way i will lighten the flywheel and hopefully change the gearing a...

Hey! sorry iv been offline a couple of days! I used square washers about 40x40mm wide, stainless steel, picked them up from b&q for about £4 for 4 of them... the way i done it was like this; Used a big square washer to sit on the suspicion cup with the bearing built into it, Placed...

sorry didn't explain myself properly, iv undone the top bolt on the cam, i meant the one big bolt behind the cover that holds the 2 sprockets that joins the bottom chain to the top chain, do I undo that bolt then lift the head up with the bottom chain and sprockets as they are?

with the timing chain, do I just undo the bolt holding the 2 sprockets and lift the head over them? or do I have to take the bottom chain off too?

okay, so iv made a start on getting the head off my other engine, and safe to say it is caked inside!

If I had the time and money I would definitely do this tho.. http://www.speedhunters.com/2012/09/nissan_micra_pickup/