Search results

  1. welcometohell38

    French turbocharged project

    Some news about my micra ! Nistune installed, the car have been tuned by myself: The fuel and timing map have been modified, the gain of torque and horsepower is funny but i have to work on the fuel map to adjust it a little bit. Now i have to build my turbo manifold:
  2. welcometohell38

    NATS vs Nistune remapping and new ECU

    Mmh. I think i have to find the same ECU as mine OR a complete NATS system (ECU / NATS control system, keys...)
  3. welcometohell38

    NATS vs Nistune remapping and new ECU

    I'd like a spare ECU for my Nistune: Is anybody can tell me if i MUST buy exactly the same ECU as the one installed in the car (same bosch part number + same Nissan part number) or any K11 1.3 NATS ecu can fit ? Mine is 23710 74B63 and il find many 23710 74B62 or 23710 74B61...
  4. welcometohell38

    French turbocharged project

    Thanks franck that is what i want to hear ! :)
  5. welcometohell38

    French turbocharged project

    My turbo is not installed yet. ;) Here is a (bad) video of first and second gear. You can see AFRs.... It's good on very high revs but on WOT from 0 to 6000 it's too lean i think...
  6. welcometohell38

    French turbocharged project

    Any ideas on my problems: my CG13 runs too lean on WOT (13.5/14 Afr). Timing is ok. New spark plugs. I'll test the fuel pressure... (Bought a gauge on amazon this morning). My engine vibrate: rear engine mount is dead, I need a new one ! :D
  7. welcometohell38

    French turbocharged project

    Thanks !! I hope my NATS gonna work with my Nistune board...
  8. welcometohell38

    French turbocharged project

    Not yet, just received my cga3de fuel rail and almera 1.8 injectors. I have to modify my ga16 tb (not installed too) to fit the top feed rail.
  9. welcometohell38

    French turbocharged project

    Yes i know that, don't worry, the turbo is not installed, i have to weld the home made manifold. Only gauges (and intercooler) have been installed, I'd like to monitor standard setup to see if everything is fine and... no ! My AFR are bad. I have to find what is the problem.
  10. welcometohell38

    French turbocharged project

    Some news ! Just received my stuff, installed the intercooler and the gauges. Waitin' for my Nistune board. Problem: my AFR is not very good, 15@2500 to 6000 rpm on WOT... It's too lean right? Ignition? Fuel pump? Tb? I've tested with afr sensor on lambda plug + lambda emulator to ECU. An...
  11. welcometohell38

    French turbocharged project

    I've got a Innovate MTX-L wideband
  12. welcometohell38

    French turbocharged project

    Thanks for your responses guys, To begin this project, i'd like to test with GA16 throttle body + GA16 injectors + ecu N/A tuning to see the CG13 reactions. I have to weld a bung on my stock downpipe and find how to connect the GA16 throttle body on the k11 loom. The problem is: I must weld...
  13. welcometohell38

    French turbocharged project

    Hi MSC ! :) I'm Chris from France and i will try to present to you my cheap turbo project (maybe the first in France ?) on my 2000 K11 CG13DE. (i hope you understand my "frenglish"...) This car is a "test car" to learn "turbocharged=>NA ECU tuning", welding... I've got some pieces from other...
  14. welcometohell38

    WTB HKS turbo manifold

    I need an HKS turbo manifold. Thanks
  15. welcometohell38

    100NX 1.6 discs on K11 - Problem

    And what about drilling hubs for discs centering bolts?
  16. welcometohell38

    100NX 1.6 discs on K11 - Problem

    Damn, tape to center a disc!??! o_O
  17. welcometohell38

    100NX 1.6 discs on K11 - Problem

    I think hub holes are too big to center the disc... :( I can see free play on the disc...
  18. welcometohell38

    100NX 1.6 discs on K11 - Problem

    Hi, I've seen a lot of threads where people put 100nx b13 1.6 discs (and calipers) on k11 micra. I'd like to do that on mine: I've bought Nx 1.6 Mintex discs and i've got a problem, these discs are non hubcentric on micra hubs: Micra hub: 59 mm Nx discs: 61mm How to do a good installation...
Top