Search results

Im having a problem location the reason why my offside main and highbeam headlight isnt working, I bet it's a simple problem, but im just sratching my head at the moment. I tested the bulb, it was fine I've tested and check the fuse behind the nearside headlight, that's fine Ive even checked...

Unmodified Nissan Micra 998cc Engine CG10DE 60' : 30.396 Seconds @ 26.91 mph 330' : 08.462 Seconds @ 44.03 mph 1/8mi : 12.476 Seconds @ 53.93 mph 1000' : 16.484 Seconds @ 61.08 mph 1/4mi : 19.370 Seconds @ 67.37 mph 0 - 20 mph : 02.389 Seconds 0 - 40 mph : 07.466 Seconds 0 - 60 mph ...

Got a new speed clock, turns out the gears that control the needle had dismantled,

when i say "i cut the wire" i cut it on the motherboard next to the lightbulb because you cant remove the bulb, its fixed on the board

Im just getting my car ready for m.o.t, so what i've done is knock the airbag light out,.... (because i have no airbag) the way i did it was cut the wire to the airbag warning light, i then come to plug the harness back into the dail gauges and everything but my speedo works, (but the airbag...

hope so, my orginal idea was to make a wiring loom for micra - supra, but if im having this much trouble with the micra tps, the supra going to be worse

Thats what ive been thinking but reading the haynes guide has "mind****ed" me

Ive built my throttle body manifold and attacted my throttle bodies http://i1174.photobucket.com/albums/r616/stevenROwilliams/Conwy-20121027-00135.jpg Ive looked at the wiring for the Micra on te Trottle Pisition sensors and theres Green = Neutral Switch Blue = AAC...

Ive just brought and just recieved a bueatiful turbo off ebay for £35, its in 100% perfect condition, got myself a boostcontrol, and all the alloy tubing i need, just need to get the intercooler. What im wondering is how anyone has fitted the turbo before, have you got a manifold to fit it or...

Recieved, and saved me quite abit of time, thanks

Im currently beginning my project of installing a Individual throttle body (ITB) I brough a Toyota 4A-GE (ITB) from Ebay (hong kong) the other day, which im going modifiy and fit on a cut manifold (i will write a blog on how i've done it and photograph it step by step if anyone is interested)...

I got a facelift one from ebay, but each year is different, the 2001 one doesnt fit the 2002 >.<

I just need to find out if i would get away with it with the m.o.ters

Ahh according to the holy bible of vehicle mechanics, the haynes guide, its the pink wire, it was right with the tachometer, so im guessing it must be right with this

About 2 years ago, i took out the steering wheel (fitted with Airbag) and replaced it with a nismo sport steering wheel (Airbag Less). With harnesses, I'd be very unlucky to hit the steering wheel, but none the less, VOSA and the M.O.T testers didnt mind that untill January 1st 2012, The best...

Should of worded that better, what caused my bearings to fail was, because of my own offishness and lack of research on the subject, the bearing had 200Kg/cm on the side of each bearing, and i wasn't equal, because the strut caused the top spring plate to be off-center, causing the 200kg/cm of...

The way i did it last was not to have any spacers.... £30 later replacing the bearings i learnt my lesson. The thing you need to look at whilst setting the coilover up is, is everything level, is there any play, and is there an restriction to the bearing, thats what i made sure before letting...

When i first got the coilovers i did try and use the rear blue springs with the blue raisers (ive not included the raisers in the picture) but the ride and the noise was horrible, i was lucky not the damage the shock, the only thing ive noticed with the current setup is the rear springs are...

thanks for the feedback, i'll try and repost this, if ever it should go, and i wasn't aware of using corsa top mounts, the way ive done it seems to be perfectly working, theres no knocking whilst driving

I would like to say, i wrote this for a micra.org.uk member.... i can't remember your username, i hope you find this