Search results

True.. Never here of a Nissan having head problems! but I didnt know how much power you were going to run. My Pully' has 486at-the-wheels running stock conrods, gaskets and exhaust, forged pistons + rings, uprated injectors and intercooler and an Apexi filter.. gearbox is being rebuilt atm I...

get come engine degreaser like gunk, or wynns or something and bobs your uncle!

http://www.youtube.com/watch?v=mlI1tW-wkwE Just spotted it whilst looking at hoodedreapers videos.. that wing is HUGE, I spend 6months of my year in Japan, and they're crazy when it comes to custom kits. Anyone seen the "Mini-van's" with gundam-wing style bodykits?!

There is no "cheap" way to turbo any car. Your basic setup would/should be; Turbo Manifold (either custom or off the shelf, custom more-than-likely) Down-pipe Turbo, you'd have to ask guys and lass' on here on what they run.. Intercooler + all pies and joiners New exhuast system Aftermarket...

custom it! I'm assuming its just; Cut with a grinder Sand jaged bits down with a file filler bits needed to be fillered sand down flat primer paint make sure its bloody straight tho!! :p

thaught so, just down the road! anything they do?:p

wheres the front light gone?????

Sorry to thread jack but are these the guys; Autosprint :grinning:

Plus if you want to know the exact date your car was built/registered on goto 1stchoice < click ME!! ype in your reg/any reg you want abit of info on and Tadah! helps with exact month/trim type incase you dunno!

I saw that before! :p you're on Stanceworks! Is that flocked?? looks **Hong Kong Fuey** amazing :laugh:

The March ones? I got sponsored last year for DriftX(cross) which is basically Auto-cross crossed with Drifting because they dislike the use of Gymkhana as Ken Block has changed its meaning too much! and to practice I'd just put a subway/maccies cup of water in the cup holder Initial D styleeee...

I'm currently helping a friend rebuild a Nissan GTIR pulsar (450bhp At the wheels as of yet, QUAIFE reinforced Gearbox etc) and he said to me I should redesign His and my Dash (once I goto get a new Micra :doh: ) I've built many custom Fiberglass and CF dashes in the past but now I want to go...

Id take it to a Engine centre and they'll know where to drill/balance it at.. the place I goto use a thing which spins it at 100rpm all the way upto 9900rpm.. so they can see where its being thrown out etc! Did it on my SR20DET I built, dropped a lightened flywheel + clutch was all good

Yes.. I'd love to try it! I just need to get it all designed up and speak to the local machine/engine shop! (Y)

WillenhallEngines will machine you a crank up for about £500-1000 dependant on type of crank/design etc etc they can even do bottom end skimming/machining to lower the crank area.. but its all down to money.. shame theyre 2mm thick.. 8U66ER! Not to far away from you frank (Y) I'm Wolves way...

Daym.. If you were to have come into our Autofactors that would have been a first point of call... Were a distrobuter of Wynns and atleast one of the staff has used the product we recomend! The company has been going since 1975 so the boss has the most experience!

Right so it turned out that the guy I was going to buy a 1.3 off was a Muppet and lets say pictures can be desceving! I currently have no Micra.. or car! :( but I still have a working CG13DE (Y) By using the basic maths & phsyics rule of capacity ive decided to try to build a 1.6CC engine...

No worries mate! Just glad I can help (Y) If I can help someone on here maybe at a later date they might help me :grinning: BTW look for the E-marked/Street legal bulb sif you want to pass MOT.. unless your going to swap them at MOT time??

He normally breaks Civics, Toyotas, Supras etc He had a couple of Imported Marches which I need to go have a look out for :laugh:

Yeahp and made a £325 proft ;) All the 1.3 needs doin is MOTing becuase its just run out.. didnt veiw the car I just saw it, phoned the Insurance got a quote £975 Third Party, fire and theft (Booo!) which is cheaper than the 1.0 was WTF??? Phoned my mate with the words "You know how your...