Search results

  1. richardwbb

    offtopic merry

    all the best wishes and health from netherlands o-man
  2. richardwbb

    fai towhook?

    I admit I just ask and perhaps can find it myself easy but a FIA approved towing band, where should I look for that? My other Nissan has a 7,50 coins towing band and I oopsie lost my front (non welded) tow iron
  3. richardwbb

    Need some help with k13 knowledge on how to fix

    I have someone that own a k13 and asked me how to get rid of stock antenna, what are my options since I will do this modification?
  4. richardwbb

    Broken bolt and Boa Grabit to the rescue but what mains power drill is this on photo?

    Years ago I borrowed two items and it was a Boa Grabit and it served me well. Amazon has it for such a low price they can not give free shipping for it ;) Here is a photo of the drill I used, can you...
  5. richardwbb

    Adjusting CG13DE with Datascan, timing gun

    Hi there, I happen to have a GA16DE and a SR20DE in another Nissan but I do not have the CG13DE any longer. I am aware where it's idler screw is located also I am aware what the timing marks are on the crank pulley but I will help a friend adjusting his car. Complaint is won't pull before 3000...
  6. richardwbb

    How to replace rear enigine mount k11?

    Hi there, I'm about to replace my rear engine mount but I never did this before. I have no second man for assistance but I do have a decent garage jack, air tools and two Nissan spare tire replacement jacks and since I will work on the floor I will need to use my four jack stands for raising the...
  7. richardwbb

    engine side noise with reverse gear

    Since I bought my Micra it made a hr hr hr noise rather loudly when in reverse and lightly sporty. I can not find any marks on engine or chassis. Mileage is 150k, are there know causes?
  8. richardwbb

    Loctite but which one

    Which Loctite do you recommend me for general use?
  9. richardwbb

    The fuel pressure

    I've put in an Ga16DE and didn't bother about the fuel pump. Now I wonder, is there a difference for Cg13DE and Ga16DE required fuel pressure? Drives good, just doesn't tell me everything.
  10. richardwbb

    A nice picture for the timing marks of the Cg13DE crank pulley?

    I just adjusted a Cg13DE. It was not very easy to find the idle screw but the large flat screw driver fitted nicely. Then the timing. I do own Nissan manuals but for k11, I wish there was a paper version. On the other hand, I think I know the scheme but k11 manual said adjust idle. Put timing...
  11. richardwbb

    k11 only are there obd2?

    Someone told me in 1996 a European car comes obd2 equiped, then I read somewhere, European car support obd2 after 2004 year. Since I like to read engines with Datascan, I would like to learn if someday I will meet someone with a k11 too and find out the connector doesn't fit and I want to avoid...
  12. richardwbb

    Cg13 coil on plug conversion, easy or not so easy to pull off?

    Doe some one run coil on plug on a Cg13 engine? If not, is it possible? I ask this because I since a short time have learned that the most spark energy is being lost at the rotor onto the cap, no matter how new those two parts are it stays significant.
  13. richardwbb

    Parts store in the United Kingdom

    I have trouble finding some parts for my k11 and exhausted The Netherlands and Germany for quite a bit too. What car parts stores with webshop can you recommend to me? Autodoc won't work because it will redirect to overhere.
  14. richardwbb

    brake line rust prevention

    I live in the Netherlands so I'm not aware of regulation around brake lines and MOT but it wouldn't surprise me if it is the same regulation. My car was welded bij someone who also did the MOT and my brake lines came back like this. Looks this allowable to you?
  15. richardwbb

    Richardwbb's 1993 Super S LHD sleeper.

    I do have a topic from the beginning with the engine side motormount modification in Dutch but here goes after setting my brakes, wheels, shocks and alignment straight. Here is the engine. I bought a 350 coins Super S which was steep considering the defects but it was the only Super S at that...
  16. richardwbb

    Door projector light

    I opened an Audi door and the Audi logo showed on the floor. Wondering this would be stock or not, I learned these projectors can come cheap via ebay or ali. But that Audi has stock normal lighting in it's door and of course a k11 hasn't. Here is another example, still that car has it's own...
  17. richardwbb

    How to make old alloys shiny new again along with the plastic cap?

    I have original Nissan rims dating from 1993 and I want to prevent further corrosion by sanding and then put some wheelspray on it but I'm completely lost on the subject. How do I do this better then sanding it a bit and throwing wheelspray at it?
  18. richardwbb

    How to tell if a motormount is gone?

    My k11 shows some engine hopping when driving. I have no clue how to tell motormounts are bad or not. Are there some tips or testing ways I need to learn to help me diagnosing my driveability issue?
  19. richardwbb

    Stock tire size k11 1993?

    What is the stock tire and rim size for a k11 from 1993? I do not have the booklet and internet wasn't much help. Also did tyre size change for later k11's? What tyre size is still a fit under a lowered k11 scrubbing wise and load wise?
  20. richardwbb

    Rev counter Super S?

    My Super S has a rev counter that works usually and then stops working for a while and come back again for the greater part of my driving. I'm not happy without a rev counter and honestly I have no experience with soldering or reworking a rev counter for a k11, I believe those are rare, if not...