Search results

  1. M

    1.3 cutting out and showing check engine light

    Seen a post saying you can test the mafs , how ? With a metre if so where do you test ?
  2. M

    1.3 cutting out and showing check engine light

    So it might be worth resoldering the maf ? And yeah they have been checked did the sanding trick on the cap , got a spare arm I could try
  3. M

    1.3 cutting out and showing check engine light

    Took the maf off and sealed it up with silicone rtv and checked all the injectors at 10.8ohms , maybe it’s worth re soldering the maf , I’m thinking it must be the maf bc when it’s unplugged and looped so it doesn’t have a limiter it runs fine with no juddering
  4. M

    1.3 cutting out and showing check engine light

    Just had a different maf surely it carnt be the same??? It was a lot better for a little bit but then got worse again , and all of the time Cold or hot , more when it’s hot
  5. M

    1.3 cutting out and showing check engine light

    Ahhhh brilliant thank you I’m gonna try that now !
  6. M

    1.3 cutting out and showing check engine light

    So if I’m driving along my car will cut out for a second not even that and flash the check engine light once not even enough for it to fully light up , however sometimes it will flash constantly and the car will stall and I will have to turn the key off for 30 sec then it will start fine , I was...
  7. M

    Engine knocking

    Okay I’ll give you a pm another day when I know what I’m doing with the engine
  8. M

    Engine knocking

    How bad would it be if I just bought some new mains and used that crank without grinding it ? Your crank @frank
  9. M

    Engine knocking

    0.25 on eBay that’s all I can find and how much for the 1.3 crank will it also need re ground
  10. M

    Engine knocking

    @frank are you still selling 1.3 engines ?
  11. M

    Engine knocking

    So needs the crank re ground and new bearings ?
  12. M

    Engine knocking

    How can it just start one day thought like after 30 secs of starting
  13. M

    Engine knocking

    How big of a job is it to do ?
  14. M

    Engine knocking

    gutted ! I will still check the tensioner anyways just incase only just put the engine in a week ago
  15. M

    Engine knocking

    Random knocking sound started this morning on my 1.3 micra no idea what it could be , timing chain ? , big ends ?. Had a oil change not long ago and the oil levels are fine it was burning abit of oil but that seemed to stop just recently and then this knocking noise starting this morning I also...
  16. M

    Central locking ?

    I’ve got a 2000 micra no central locking if I get all of the bits from a central locking model will I be able to fit them straight into mine ? Excluding the wiring obvs. Has this been done ?
  17. M

    Ecu wiring diagram

    Probably been covered millions of times , will be running a speeduino soon for a turbo build need the standard ecu wiring for a 2000 dizzy type If anyone has it be much appreciated or know where u can find one thanks
  18. M

    Rear bumper movement ?

    Hi is it possible to move the rear bumper back like 10mm to clear tyres ?
  19. M

    K11 1.0 turbo.fuelling help!

    Mint cheers to clearing that up mate just so much info on here don’t know what to go with haha will get some ga16 injectors ordered ASAP
Top