Search results

  1. Nioreax

    Cup holders in a preface lift

    Vent ones just break the slats (ask me how I know) the door ones are the best option and cheap on eBay.
  2. Nioreax

    K11 pre-facelift windscreen washer bottle filler neck

    Mine has been shattered at the top most point for the entire three years I have owned it, holds easily 4.5litres regardless.
  3. Nioreax

    Endlessly searching for the new types of pie.

    Endlessly searching for the new types of pie.
  4. Nioreax

    Article on micras.

    Nope, if anything the engine braking is reduced all together over how it was, the box in mine is really nice, has a grind noise occasionally but kicks down super smooth, it has the fluid changed by a group in Rochdale that focussed on autoboxes and CVT's had it done twice in my ownership (since...
  5. Nioreax

    Article on micras.

    Replaced the O2 Oil was changed 1,000 miles ago 15w40 if I recall, was verified correct and I trust the chap who did the service ( I was present ) I tend to drop it into N when coming to a halt due to the jumping idle it's not easy on the gearbox otherwise, the idle will hop 3-4 times then...
  6. Nioreax

    Article on micras.

    I am so close to giving up on mine, but holding on for dear life. Got a OBD1 Consult on it's way hopefully arriving this week, and getting DataScan I setup on a laptop to try and pull codes or even live data to figure out WTAF is going on. It drives and runs fine, but coming to a halt from...
  7. Nioreax

    Throttle cable relocation?

    On that note *forgive me op* can you drive with the extra connector on the TB removed for diagnostic purposes?
  8. Nioreax

    K11 CVT Hunting Idle coming to a halt

    That is on the throttlebody right? I just got a refurb with new sensors! I may use the old units sensor then.
  9. Nioreax

    Consult OBD1 Cable sources?

    And work with the older Pre-Facelifted cars? I noticed your avatar is a post FL.
  10. Nioreax

    Consult OBD1 Cable sources?

    What version of Windows do you need? sorry for all the questions until this evening I thought these where impossible to get! will be a huge help with my 94 PreFL.
  11. Nioreax

    Consult OBD1 Cable sources?

    Don't suppose you would have a link or keywords?
  12. Nioreax

    Consult OBD1 Cable sources?

    Looking for a OBD 1 Nissan Consult cable. UK based. With or without the Consult software.
  13. Nioreax

    K11 CVT Hunting Idle coming to a halt

    Hey all. Got a 1994 Pre-FL N-CVT K11. I just had the TB replaced with one already refurbished, and I've run into a strange running issue. Coming to a slow from any speed such as 40mph, the CVT box disengages like normal under 15mph but the RPM will go (800-1500, 800-1500, 800-1500) before...
  14. Nioreax

    Hunting idle after replacement TB fitted.

    Hey all. Got a 1994 Pre-FL N-CVT K11. I just had the TB replaced with one already refurbished, and I've run into a strange running issue. Coming to a slow from any speed such as 40mph, the CVT box disengages like normal under 15mph but the RPM will go (800-1500, 800-1500, 800-1500) before...
  15. Nioreax

    High Idle that resets after ignition off/on. CG10DE Pre FL 1994.

    So forgive my ignorance, so it's attach the new TPS to the TB on the car. then with the throttle at 0% touch any of the pins on the TPS and look for 0.5v? I presume if it's out I need to adjust something if so what?
  16. Nioreax

    High Idle that resets after ignition off/on. CG10DE Pre FL 1994.

    Thanks will help me nail this issue down, so far compressed air and contact cleaner resumes normal operation, but I am pondering how long for.
  17. Nioreax

    High Idle that resets after ignition off/on. CG10DE Pre FL 1994.

    Never touched this before apart from removing the clean and cleaning it. Is it replaceable with the TB on the car using normal tools or will it need calibrating by a mechanic?
  18. Nioreax

    High Idle that resets after ignition off/on. CG10DE Pre FL 1994.

    Don't suppose you would know the part number? It's the angled sensor prominent in this image.
  19. Nioreax

    High Idle that resets after ignition off/on. CG10DE Pre FL 1994.

    I have finally solved this and for anyone else the solution is this: My k11 is RHD. So standing at the drivers wing, look for a connector on the throttlebody under the air box house facing towards the windscreen, take this out and clean with both WD40 Contact Cleaner and Compressed Air. I did...
  20. Nioreax

    High Idle that resets after ignition off/on. CG10DE Pre FL 1994.

    Just had it cleaned and the o-ring replaced. Issue returned after 24hours. Ordered a new TB from eBay and plan to strip and rebuild this one on the car currently.
Top