Search results

  1. pollyp

    Hoodedreeper's K11 v3

    That looks soo lovely & clean [emoji108] Sent from my CLT-L29 using Micra Sports Club mobile app
  2. pollyp

    PollyMobiles Rebuild

    it's a 2003 Peugeot 307 1.6 16v petrol Rapier 3dr
  3. pollyp

    PollyMobiles Rebuild

    all the brake discs on the peugeot are terribly rusty so I began replacing em. it was a rush against time to finish all 4 corners before the rain was forcasted to come later. was exhausting work but I did it all just in time 🥵😁
  4. pollyp

    PollyMobiles Rebuild

    my front left worn wheel bearing will need replacing before her MOT in december so I brought this kit bearing #35BWD16 gonna take the hub to a local shop to replace em some day the old screen wash hose has age hardened & cracked/leaked, so I replaced it with a new silicone hose😬 haven't...
  5. pollyp

    PollyMobiles Rebuild

    moms peugeot 307 failed its MOT with just a snapped front left spring and a missing CV boot clip. brought a new spring and began taking the old one out. jeezuz every time I work on this car I just hate it more & more 🤬 had to remove the whole wiper mechanism just to loosen the top mount. odd...
  6. pollyp

    Hoodedreeper's K11 v3

    Gr8 work Chris [emoji106] Sent from my CLT-L29 using Micra Sports Club mobile app
  7. pollyp

    15" width and offset

    my front rim sits flush to the arch (rears needed 8mm spacer to make em flush too) and doesn't rub at full lock or full bump but I've removed the plastic inner guard. fronts at 6.5xet40 doesn't need spacer. 7" x et32 imo is abit too wide as shown in ur graphic. the inside lip is 5mm wider than...
  8. pollyp

    15" width and offset

    I run 195/50/15 on 15 x 6.5J x ET40, with an 8mm rear spacer (made from old brake disc), dropped 50mm, 2deg front camber
  9. pollyp

    PollyMobiles Rebuild

    - replace the old dull grey cloth door card with a sleeker black panel to match the black dashboard look, - seal better against the door frame with a thick, rigid & waterproof panel secured with screws to improve bass, - easier to access via screws compared to weaker panel clips
  10. pollyp

    PollyMobiles Rebuild

    quickly sprayed the rear enclosure matt black so it looks more subtle in the rear window finished making the rear door cards to complete the set 😎
  11. pollyp

    PollyMobiles Rebuild

    I'll have a wonder tomorrow :)
  12. pollyp

    PollyMobiles Rebuild

    to improve the rear speaker bass, I measured and designed this simple parcel shelf enclosure marked out the pieces on this free sheet of old 15mm wardrobe panel found in the house 😁 carefully cut and marked all the holes to predrill held the pieces together into place with tape whilst I...
  13. pollyp

    PollyMobiles Rebuild

    oh yes I've subscribed to Jodie for few years, lots of gr8 tips and examples. also watch Weld.com too yup I often get the tip way too close and foul it. and spend another few minutes snapping the end off and regrinding it :rolleyes: brought a pack of 2% thorated 1.6mm red tips since I'll go...
  14. pollyp

    PollyMobiles Rebuild

    New Foamex door panels The original fabric/card door cards are getting old, filthy, leaking sound and dated so I brought these 5mm sheets of PVC foamex (often used for signs) to make some new panels I'll be screwing the new panel directly onto the door frame for a good solid seal so I...
  15. pollyp

    PollyMobiles Rebuild

    indeed I've been using it few hours per night for past few days, finding it hard to feed smoothly, lots to learn, and bottle is almost down to 1/2 hopefully collect a 20L this weekend from Andy. I'll book the training course once I feel I progressed along the most I can and need extra help...
  16. pollyp

    PollyMobiles Rebuild

    I wasn't happy with the chunky, bulky, heavy, rigid feel of the R-Tech torches, just couldn't get comfortable with it. opened it up to look inside and reveal a simple thin hose & switch heads are screwed onto the flexi hose both plastic handles are the same, too bulky imho got rid of...
  17. pollyp

    PollyMobiles Rebuild

    2020-09-25 New TIG Welder I've been wanting to invest in a TIG welder to improve my welding and bring new capabilities. For a few months I've been interested in the R-Tech TIG170ext and TIG161 cos they can run on normal 13a plugs, weld alloy, have excellent 3yr warranty & customer support...
  18. pollyp

    PollyMobiles Rebuild

    the old peugeot 307 exhaust has fallen off so it's time to replace it all. got a cheapo silencer off ebay and just look at this shoddy hanger welded onto a bracket and barely bolted on :unsure: just baffles me why they did that when the other hanger was welded on like normal? I welded the...
  19. pollyp

    PollyMobiles Rebuild

    brought this miniUSB-mic adapter thinking they were all the same :unsure: only to discover they're NOT the same and the external mic didn't work :rolleyes: cos I actually brought an adapter for the old Motorolla handset which only uses the lower 5 usb pins for audio, whereas cameras like...
  20. pollyp

    Throttle cable relocation?

    yes https://www.micra.org.uk/threads/pollymobiles-rebuild.35251/page-187#post-784074
Top