look at this
I bought this bluetooth obd1 cost me 21.66 took about 2 weeks to arrive. I haven't got it up and running yet as deciding on whether to have a seperate phone running just this, but I did pair it with...
I have had this noise for quite a while and no it is not belt tension as numerous people have told me, at a recent MOT the guy showed me the idler pulley was not rotating hence the awful sound. It only happens on initial start up and then stops when normal driving.
I have lived with this, the...
Thanks Frank yes sorry no abs
the brakes were fine and only occasionally mainly at very slow speed the pedal just soft then back to normal although seemed to be getting worse so have stopped using the car until I can fix it.
I wasn't very clear I meant to say cut off and replace both track rod ends.
I had four new tyres fitted and asked for the wheel alignment to be checked, unfortunately the drivers side wheel bearing is shot so unable to align, passenger side fine.
I am looking at replacing with s/h part have a 2001 1.0 hub on ebay for 15.00, will that fit my 1.3 june 1998 car?
thinking about converting to lpg and spotted this on fleabay currently £200 no bids and just round the corner
and found the...
have been trying to give my 98 gx 1.3 85k a complete service all fluids underseal etc whilst I was changing brake fluid took off the drums and shoes needed changing. I noted that removing the hub is preferred method but don't have that socket nor access to breaker bar.
So 4 hours...
just bought JVC KD-DB42 DAB HU and although they give a stick on windscreen DAB aerial I dont really want to fit it as it might attract unwanted attention plus not sure about reception as only rated 3 * reception, plus rubber mount on my rear aerial is not in very good condition.
So I am...
So today I continued working in the street I am afraid so I measured top of rim to wheel arch jacked it up put it on axle stand then jacked up up the axle and got the same distance before removing the wheel.
First lowered the bottom of the spring 12mm bolt
Then I loosened top nut of...
Thanx for the replies
I will have another look tomorrow but either by tightening the top of the spring or (the spring at the bottom is in a slot which at the moment is at the bottom) or by lengthening the slot down should do the trick?
Oh and by the way Frank big thanks I sorted my sagging...
Hi I read the guide re this topic but assume it is for pre-facelift models, do I need to adjust anything for a facelift?
I have issues with mpg and thought it might be rear brakes binding amongst other things which I am addressing.
Thanx for any ideas