Search results

  1. W

    P1706 code engine light on +no reverse light still.... after changing the switch and light bulb

    i will have to check again, FYI the Check Engine light on the dashboard has come back on, and same error code P1706. i will follow your guideline for the fault find and hopefully can identify the issue. thank you very much for your help, very knowledgeable and helpful. :)
  2. W

    P1706 code engine light on +no reverse light still.... after changing the switch and light bulb

    my rear wipers is up and running again ! thanks for the advice :) discounting the battery to reset the BCM worked. so my wiring in the boot seems to be in tack... still no reverse light and there is no voltage at the bulb connector. the reverse light switch is new i fitted that last week...
  3. W

    P1706 code engine light on +no reverse light still.... after changing the switch and light bulb

    hopefully not the wiring because I am not good with electrics. mechanical stuff I am much better with lol will let you know if this fixes both these issues.
  4. W

    P1706 code engine light on +no reverse light still.... after changing the switch and light bulb

    thank you very much for your help guys, I am going to try reset the battery ! dont worry I have my radio code! its 1283 if this works for any one else :)
  5. W

    P1706 code engine light on +no reverse light still.... after changing the switch and light bulb

    hmm, ok thanks for your advice, what do you think is wrong with this in this case... i will jack the car up and clean up the contact point when the weather is better lol will also check for voltage may at the bulb side with the ignition on reverse gear in. i suddenly lost the rear wipers as...
  6. W

    P1706 code engine light on +no reverse light still.... after changing the switch and light bulb

    not yet, i will also check this thanks. what could it be if it's no / voltage to the bulb? where should i be checking as well many thanks
  7. W

    P1706 code engine light on +no reverse light still.... after changing the switch and light bulb

    anyone else would have any other suggestions for this P1706 fault code ? thanks
  8. W

    P1706 code engine light on +no reverse light still.... after changing the switch and light bulb

    thanks for letting me know, I will try this. any other suggestions ?! appreciate all help and advice Many thanks
  9. W

    P1706 code engine light on +no reverse light still.... after changing the switch and light bulb

    Hi all, On my 2005 k12 1.2 sport daily, recently the reverse light stopped working and I want to get this fixed, Did the usual fault finding, changed the bulb, got a new aftermarket reverse light switch, replaced it under the car by the gearbox. After changing both of these, the engine light...
  10. W

    advice and help on my k11 whinning noise on idle

    hi all, i have a problem ... say the least... lol my 1997 998cc k11 73k miles starting making a whinning noise on idle. with a funky burnt plastic smell to it. volt meter is reading 12.3v on idle. rev up it goes to about 13.1v. also ive tighten the tensioner. im really hoping some of u...
Top