I have a set of BBS split rims. These are very rare
There 13x8 and have had the centres machined to suit the micra.
The centre are magnesium and very light each wheel weighs 4kgs.
I have got the centres powered coated black.
The wheel currently need building but I have put one together to show...
Hi I'm selling my hybrid inlet manifold.
Its a copy of what the guys in Japan do to upgrade the inlet manifold on the micra.
There is a few bits to finish on it but I've done all the hard work to get it this far.
You just need a throttle body off a starlet and your ready to rock.
Looking £100 for it
I'm running a 1.3 engine with the 1.0L pistons and ported head with std cams, have a 4 branch manifold and air filter aswell.
The question is will it run ok on a std 1.0L ecu I Know frank should be able to answer this no problem.
Well I am expert on this as I build race engine as my day job and run the engines on the dyno. The main thing is too never let them idle for periods of time. Rings bed in due to the pressure of the compression behind them, this is why the engine has to be underload all the time. If idling it has...
Mineral base oil is o.k, but millers do a 30w running in oil that excellent at running in the rings and if your running racing rings due to been a forged piston after 400miles it should be run in, then change to a mineral based oil for another 400 miles. Then that it run it normally. The first...
What oil are you using for the break in ??
Also do not allow a new ringed engine to idle, I know from a lot experience that once happy there no leaks and oil pressure good get it underway straight away and under load, don't use any light throttle.