Search results

  1. Suepr Turbo

    Suepr Turbo

    sfjalfa bruh.
  2. transmission shafts.jpg

    transmission shafts.jpg

  3. SUPA TABOO

    SUPA TABOO

    MA09ERT stuff
  4. IMG_6641.JPG

    IMG_6641.JPG

  5. Christopher Andrews

    Any ST owners still active?

    I think most of the parts are common to the Figaro or the Nissan Micra/March K10 Chassis. This forum specifically doesn't seem to be very active.
  6. Christopher Andrews

    Pictures of Vacuum Control Valve (UFO) Internals

    Hello, I'm still trying to suss out what's wrong with the engine over boosting and I'm slowing checking all of the devices as per the Nissan engine manual. One item that I haven't tested is the UFO valve. I was looking through the older posts and someone pulled of of their duplicate valves...
  7. Christopher Andrews

    ST Swap Overboost

    Hello Again, After some noodling around this summer with building my garage, I finally got some time back on the Super Turbo. Since the last post, I mentioned that I was getting some swooshing sounds from the engine when I hammered on the throttle and it sounded like the engine was coming on...
  8. Christopher Andrews

    ST Swap Overboost

    Hello Again, I got the Figaro running with the engine swapped over. After a lot of fiddling around with data-loggers, wide-band sensors, the Japanese factory manuals, the solution was pretty simple. I used the Figaro air filter box and MAF housing with the ST sensor installed. I never...
  9. Christopher Andrews

    ST Swap Overboost

    So I got the ST Engine swapped into the Figaro. I finally managed to get it running after it sitting in the garage for about three weeks. It turned out the spark plugs were fouled despite running for two days before deciding to give up the ghost. Anyhow, before it died, it had a pretty rough...
  10. Christopher Andrews

    Super Turbo Driveshafts

    I have contacted the vendor that I purchased the engine and transmission from and it looks like they're going to be able to get me the drive shafts. The only problem is that I don't know if they're going to provide the uprights as well. I don't know if anyone knows if the output shaft on the...
  11. Christopher Andrews

    Super Turbo Driveshafts

    The original VIN plate said that it was a RS5F31V. How closely related are these two transmissions. I imagine that one digit means there's something that makes them incompatible.
  12. Christopher Andrews

    Super Turbo Driveshafts

    Hey Guys, I acquired a Super Turbo engine recently for a conversion swap into my Figaro. I figured the driveshafts would be the same as the Figaro so I never ended up getting them as part of the purchase. I did some quick searches and didn't come up with any easy answers on what I can stuff...
  13. Christopher Andrews

    Canadian needs some help with a Figaro Conversion (Driveshafts or Uprights)

    Fair enough, I only have parts post 1988 for all of my components. I'll measure them all up tonight to let you know exactly what I have.
  14. Christopher Andrews

    Canadian needs some help with a Figaro Conversion (Driveshafts or Uprights)

    I have the K10 gearbox, I just don't have any axles that fit up to both the tranny and the spindle at the wheel. I'll take measurements of all the pieces tonight and pictures so you guys can have a peek at it. Like I said, I can get the shaft on the inside of the axle custom fabricated so all...
  15. Christopher Andrews

    Canadian needs some help with a Figaro Conversion (Driveshafts or Uprights)

    That was my first thought, but the splines are bigger on the Figaro shaft, so nothing matches up at all.
  16. Christopher Andrews

    Canadian needs some help with a Figaro Conversion (Driveshafts or Uprights)

    I have the engine from the Figaro and the standard K10 tranny. I have all of the shaft, both from the figaro and the K10. I figure that the shafts from the standard K10 will fit into the standard uprights, I just don't have any access to them in Canada. Provided the K10 uprights bolt into the...
  17. Christopher Andrews

    Canadian needs some help with a Figaro Conversion (Driveshafts or Uprights)

    What is the ST running gear. Finding any parts for a Micra is pretty tricky in Canada, so you might need to tell me what that is. I figure my only other option is to get a shop to custom fabricate me some axles, which is mostly easy to do, just pricey.
  18. Christopher Andrews

    Canadian needs some help with a Figaro Conversion (Driveshafts or Uprights)

    Hey Guys, I just got my transmission into my Figaro and all of the bits sourced here and a I ran into a problem with the drive shafts. The shafts on the Figaro are bigger than the K10 shafts that I have from the donor car. The car is long gone so I don't have access to any of the parts. I...
  19. Christopher Andrews

    Canadian looking for RHD pedal box on a K10

    Hey Guys, I stumbled upon this site looking for some information on doing a manual transmission swap on my Figaro. Micras are pretty scarce in Canada, but I ended up finding one with all of the goodies I need, except that the pedal box is incompatible. Does anyone have a K10 pedal box and...
Top