Search results

  1. bobsp16

    Cheap Tuning Advice

    stop asking for cheating idea's carl
  2. bobsp16

    MA 10 DIZZY.

    heard it all now,,,, block of wood under the peddle...and playing with rota arms fitting a shift light or rev counter still will not stop you over reving the engine,, just like sn 31 says fit a rev limiter
  3. bobsp16

    Ignition Advance

    best timing I found was 26 deg advance at 4000 rpm (vacuum pipe block off)
  4. bobsp16

    Best looking k10 ever

    at the nec this weekend
  5. bobsp16

    Advice on buying a carb

    don't mess about changing the dashpot spring or anything in the carb,,,use standard engine oil in the top damper......try and set it up without doing anything to the needle,,,1st get it to idle,,,ie set the throttle stop so the engine is running around 1000rpm and then wined the mix screw in or...
  6. bobsp16

    Advice on buying a carb

    You can buy the correct spacer from any good mini spares place for a couple of quid
  7. bobsp16

    Advice on buying a carb

    the 44hiff looks a big carb but su's work differently to other carbs like downdraft type.....you will never see it fully open even though your foots is all the way down the vacuum dashpot will never open fully even on autograss racing k10 doing 7500+rpm
  8. bobsp16

    Advice on buying a carb

    Spacer only needs to be around 20mm thick,,,,,and the standard k10 fuel pump would be fine nothing else is needed.....
  9. bobsp16

    Advice on buying a carb

    ......Yes its bob ellis here lol
  10. bobsp16

    Advice on buying a carb

    thats the one,,,you will prob best setting up on the rolling road though....you will need a spacer between the carb and inlet....this is how it should look when finished
  11. bobsp16

    Advice on buying a carb

    you dont need them long torque tube setups for the road,,,just stick an 1"3/4 su (44hif) on that one in the picture and youle be well away..
  12. bobsp16

    Were to put your K10 engine

    http://www.ebay.co.uk/itm/KAWASAKI-CUSTOM-BIKE-WITH-1200CC-NISSAN-MICRA-CAR-ENGINE-ONE-OFF-BIKE-/251265597563?pt=UK_Motorcycles&hash=item3a8098c07b#ht_79wt_1183
  13. bobsp16

    Weber dgv twin choke inlet manifold

    On Ebay You would have a job to find better.. http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=290661007370
  14. bobsp16

    Micra smoke after head change

    dave can you put a 1.2 head on a 1.0....there abit of differents in bore size??? which head gasket did he fit
  15. bobsp16

    K10 weber twin choke carb and inlet manifold

    Ive tried it on my race car up and down the road and it works well,,,gives very good power loads more than stardard....here are some pictures... http://i171.photobucket.com/albums/u291/bobsp16/003-2.jpg http://i171.photobucket.com/albums/u291/bobsp16/005.jpg
  16. bobsp16

    K10 weber twin choke carb and inlet manifold

    This inlet and weber carb setup is still up for sale....£250
  17. bobsp16

    Difference between norma gearbox an ST gearbox

    i would'nt of throught that nissan would made a one off box just for the st it would be out of something early like a ga...etc
Top