Search results

  1. Skinner_87

    SuperS Forged Turbo Build

    Nice work Dave, i need to educate myself on cam timing, do you do lessons?!
  2. Skinner_87

    Rear ARB Droplink size

    Cheers Yes, well replacing the existing rose joints but dont have access to the car to check for an order! Thanks again
  3. Skinner_87

    Rear ARB Droplink size

    Hi Guys, Can anybody tell me the bolt diameter for the rear ARB mounting to the body?
  4. Skinner_87

    Skinners Sprint Micra

    Hi mate, I should have explained further. I will be running wider wishbones so as you say the ball joint to strut centre will change; I also have extended steering arms to fit but may keep the original ARB position when extending the wishbone, either welding up the originals or getting a full...
  5. Skinner_87

    Skinners Sprint Micra

    I have just been on to Matt H for a whiteline kit for the castor so hopefully that will help. It would be 14*7 initially with 195 tyres..... Im thinking of switching to 14*6 and a 185 tyre to widen my options
  6. Skinner_87

    Skinners Sprint Micra

    I done have power steering at the moment but i have assembled enough kit to re install a P/S which is the plan. It's bad enough as it is with the diff and manual rack! I may have to look then at the offset of the wheels to reduce this
  7. Skinner_87

    Skinners Sprint Micra

    Those are the hub spaces mate, so between the strut and hub to widen the track. Extended rod ends should be waiting for me at home, then to sort out the wishbones and shafts!
  8. Skinner_87

    Skinners Sprint Micra

    You've got it in one Dave!
  9. Skinner_87

    Skinners Sprint Micra

    It's been a long long time since an update on here. Slowly but surely more parts are coming together for the next part of this build at last!
  10. Skinner_87

    WANTED: K11 kit car / wide arch parts

    Looking for any wide track parts: Bottom arms, arches, axle etc
  11. Skinner_87

    K11 1.0 Coilpack Hunting on idle

    @Agent_Sm1th @frank Thanks guys il give these a go over the weekend as well, still no improvement, no leaks air intake side that i can find!
  12. Skinner_87

    K11 1.0 Coilpack Hunting on idle

    Thanks Frank, it does seem to run rich constantly now (real strong smell of fuel on start up) il get the multi meter on the cam sensor / MAF / TPS ! The idle control im thinking is the at the back of the TB? Either that or il try and track a know working TB down!
  13. Skinner_87

    K11 1.0 Coilpack Hunting on idle

    Hi Frank, Won't idle at all with the MAF disconnected, and no chhange swooping the lambda out either!
  14. Skinner_87

    K11 1.0 Coilpack Hunting on idle

    Hi guys, been a while since i've been back on here! Got hold of a K11 coilpack for a cheap daily (never dealt with the CGA much) and its gradually gotten worse and worse to the point now its hunting on idle from about 500rpm to 2000rpm! MAF sensor was supposedly replaced last year & there's no...
  15. Skinner_87

    PollyMobiles Rebuild

    Good to see your back updating the blog Paul! Keep it up
  16. Skinner_87

    Skinners Sprint Micra

    AP Brakes mocked up
  17. Skinner_87

    Pollymobile II Specification

    Ah I didn't think about the mileage il need to note mine. And what's an MOT? None here on the Isle of Man, we'd benefit from it with some of the stuff you see on the road! Hope gripper or Matt can sort you something
  18. Skinner_87

    Pollymobile II Specification

    Just my 2 peneth Robbie i run the normal gripper but went for a GPS speedo instead.. not sure if thats a viable option for you? :)
  19. Skinner_87

    Skinners Sprint Micra

    Civic rad installed & returned injectors back with 2% flow rate increase and factory level spray patten!
  20. Skinner_87

    Skinners Sprint Micra

    Inlet manifold took a while but is port matched up. And a jointed support made up, the extra SS bends in the mani add a bit of weight, thought it best to put some support back in
Top