Time has come to sell my K10.
This has been in my family from new.My Aunt (now 90years old) bought this new and I have owned it since October 2014. I am the second owner.
Everything works ok, it drives nicely. It’s a bit rough and rusty around the edges.
It’s a white February 1992 J reg 1...
Hi all ,
I am sure this question has been asked and answered before in the past on the forum so apologies if I am going over old ground.
My K10 wheels are rusty and leak air , they will not bead seal anymore either.
The car has 35mm lowering springs .
Will Micra K11 14inch steel wheels with...
Thanks for the advice .
I have a set of pi lowering springs and new kyb shock absorbers all round now . All shocks were well and truely knackered bar one front one . The rear ones would freeze up in the frost , the banging and crashing from the rear and the ride was terrible until they thawed...
I guess smacmax may be wanting to reduce the body roll of a K10 .
I would also like to reduce the body roll .
I have inherited my k10 winter runner from my elderly aunt and despite passing my driving test in a k10 I have been spoilt for 25 years driving hot Mini's so these days a K10...
I am looking for a some parts for my K10 .
A passenger side door moulding for a 3door 1992 ?
A window winder handle and a fuel filler flap with a lock , a white one would be good .
Thank you ,
I am looking for a set of Super S alloys for my K10 , preferably with tyres and in Sussex area .
Could also be interested in 13 inch banded k10 or k11 steels but nothing super wide .
I have a 94 1.3 Micra and and want to fit a dash with a rev counter in it .
I have read a couple of posts on the forum where owners have experianced a couple of problems .
What models have the rev counter built into the dash ?
Is it best to find one from a car the same or...
The 5speed gearbox in my 92 k10 1200 seized up today (been dodgy for a while )
stopped me dead in my tracks locking up the front wheels in a cloud of tyre smoke .
Anyone got one ? I am in Sussex , obviously the closer the better .