Just picked up a 1986 k10 1.0 4 speed this morning, my god they're slow.
Think im in love already, it's very body rolly in the corners though so wanting coilovers ASAP.
Has only done 36,000 miles and is in impeccable condition - only a little bit of surface rust wanting sorting.
Thought I'd make a thread documenting which brake setups etc definitely fit the micra with no/very little modifications.
100nx / Sunny n14/ Early Almera n15
You'll need the 1.6 100nx callipers, the 1.4/1.6 sunny brakes are exactly the same. The bits you'll need are the calliper...
Quick guide to replacing the airbag wheel on the K11 micra. Not a hard task so a guide isnt really needed, but I'm bored so here it is:
Tools needed (2000 car):
19mm socket and an extension
12mm spanner for removing battery
Phillips and Flat headed screwdriver
3mm allen key
Removed the clocks and lots of wiring. Reinstalled everything and I have indicator turn signals, full beam, etc lights but no rev counter, speedo and temp/fuel gauge. No idea why?
Have I missed an earth lead somewhere?
8 x Goodyear Eagle Touring tyres, 165/55/R13.
All have at the very least 4mm tread, majority have 5/6.5mm tread.
Perfect size for slight stretch onto 7J Wheels.
Looking for £20-25 depending on tread.
Edit: Pictures added down page, and tyres are located in Peterborough, Cambs.
Got an upper strut brace a while back, didn't fit my face lift with PAS pump and thus is why Noddie made the bracket for the pump
During trying to make it fit I grinded of a section, not much, but see the photos below. Some chips due to storage.
Will need to be repainted.
Can post, and...
Hi all, got myself a used tacho but have no idea what the wires from the tacho should connect to? For instance i dont know which wire is the ground wire....
The little sticker on the back reads 'for 12V negative ground'
Also no idea what the two metal studs on either side are for? Shown...
Item: Sparco Rev seat x2
Condition: As New
Reason for selling: Don't fit my fat ass
Bought these for me, but was meant to order a different seat....Thus they don't fit me. Good for an average person's size. They were made in March 2013, thus still have nearly 5...
I've asked a similar question before but can't find the Bl**dy thread... :/
Basically, got a 2001 1.0L Coil PAck and when I fit a PL exhaust what needs to be moved around? Like lambada sensors, etc.
Also, is there only the 1 CAT in the Mani in a 2001?
Item: Custom door cards: Gauging interest
Reason for selling:
Price: £35+ (Maybe)
Hi all, After having issues with my door cards clearing the roll cage, I decided to flatten them down, fill the speaker holes etc... Just wondering if anyone...
Item: Micra K11 Interior + Front Springs
Reason for selling: No longer needed as rally prepped cars
The interior consists of most of the interior, apart from front door cards, headlining and front dash. Message and ill see if I have it :) The...
looking for some standard fit alloys as can't be fussed with spigot rings and all that....
Only need two wheels, but I don't mind buying four
Not fussed about condition as long as they hold air and aren't buckled, quality of tyres doesn't matter as putting slicks on them