my first ever micra.

Hi all i have recently got my first k11 micra. It has the cg10de engine with distributor and a manual gearbox.

First off, does anyone know where i can get replacement door hinges from as mine are worn on the pin a dropping.

secondly any tip tricks or anything to look out for?
 
Try a local breakers yard for the hinges. They are quite easy to get a hold of. I've replaced mine before, a garage local to me sells and repairs a lot of micras so it was easy to pop in and get them from there.
 
Hi all i have recently got my first k11 micra. It has the cg10de engine with distributor and a manual gearbox.

First off, does anyone know where i can get replacement door hinges from as mine are worn on the pin a dropping.

secondly any tip tricks or anything to look out for?


Just check the cross member and sills for the old rusty problems.
 
Annoying i have just found what looks like a verticle crack in the passenger side bodywork below the rear window

Esit : turns out the rear passenger side quarter is 3-4mm thick with filler. I see alot of sanding, metal pulling and paint spraying etc ahead
 
Last edited:
Try and get the door hinges from a 5 door as they're the same but the doors are smaller so they're usually in better nick.

......yep, off a car in a scrapyard. Cheers for the tip. Bagged N14 Almera callipers too. :)

My son removed the seats from the Almera and tried to match them up to the broken Micra floor, too wide, would have be lush though.:(
 
Back
Top