Recent content by yuri1312

  1. Y

    Micra K11 CG10DE -98 takes long to start

    Hi mates, I've been having a similar issue on my 96 CG10. Starts fine when cold (overnight), starts fine if cranked a few seconds after stopping. takes about 5 to 6 seconds to start when left off for a few minutes / hours. Helps if I feather the gas pedal when starting. Things I've already...
  2. Y

    doing a SR20DE swap

    Great, thanks for the input so far mates :) What about this, any input you can give me on it? - Replacing brake lines with Goodridge Stainless Phantom lines. Are there any differences between the P10 kit and the K11 kit (maybe length)? Should I buy a P10 kit or a K11 kit for this purpose? -...
  3. Y

    doing a SR20DE swap

    Hi Frank, Thanks for the quick reply. I've also read about that in the forum :) My question is: would there be any difference between the GTI hubs and the N15 1.4 hubs (which are a LOT easier to find around here) ? Asking this since I've noticed that the rotors are different (1.4's are 232mm x...
  4. Y

    doing a SR20DE swap

    Hi guys, First of all, I know what you're thinking "not another one that's going to quit mid-project". I've read most of the topics about the subject on this and other forums (including projects) and I'm aware that it's going to be a time-consuming project (I'm having a local mechanic work on...
  5. Y

    Rear washer pump - question

    done, fixed. The pump was indeed busted. Just a matter of removing the 2 bolts holding the wheel arch and the bolt beneath the wheel arch holding the bumper to the chassis to get better access to the pumps/water bottle. After that, just pull the pump from the bottle and out it comes :) Thanks...
  6. Y

    Rear washer pump - question

    well I'm surprised. 25 quid new at Nissan here in Portugal :) Was expecting a whole lot more considering they wanted to charge me 120 quid for a pair of tailgate struts.
  7. Y

    Rear washer pump - question

    not yet Frank, as it requires disassembling the front bumper for better access. Was counting on the forum's knowhow on it, and only disassembling it when replacing the pump.
  8. Y

    Rear washer pump - question

    And would this: http://m.ebay.co.uk/itm/291177554684?nav=SEARCH work for the rear pump? One's white (front) the other's green (rear)? Are there any differences or just the color :) ?
  9. Y

    Rear washer pump - question

    Hey mates Recently My rear washer stopped working on My 1996 k11. Symptoms: Front washers and wipers are working fine Rear wiper arm is working (so that eliminates the fuse being blown). Took off the wheel arch next to the pumps. Front washer pump makes noise, rear one does not. There's power...
  10. Y

    New alloys - some questions

    Well if the inaccuracy on the speedo is ~ 10% it should be ok (the rule is that the speedo value must always be higher than the actual speed). Would love to get me some PS3s on 195/50/15 as they're cheaper than T1Rs on a 45 profile (and only a 5.3% increase in diameter). Thanks for the input :)
  11. Y

    New alloys - some questions

    195/50/15 's cannot be legalized as they go beyond the 5% tolerance on the speedo allowed over here :( hence the 45's Great to hear that it won't scrub at 30mm :)
  12. Y

    New alloys - some questions

    Hi mates, I'm thinking of replacing my standard 13 inch alloys with some 15 inch alloys, but have a couple of questions: Thinking of some 7.0x15 4x100 ET37 with some 195x45 r15 tyres. 1) I currently have a 30mm drop on my suspension. Would fitting these cause the tyres to, in someway, rub...
  13. Y

    Looking for GA15DE or GA16DE Airbox

    For a 1.0 K11, 1996. Shipping to EU country (already looked in ebay, nothing found). Thx,
Top