Some news about my micra !
Nistune installed, the car have been tuned by myself:
The fuel and timing map have been modified, the gain of torque and horsepower is funny but i have to work on the fuel map to adjust it a little bit.
Now i have to build my turbo manifold:
I'd like a spare ECU for my Nistune:
Is anybody can tell me if i MUST buy exactly the same ECU as the one installed in the car (same bosch part number + same Nissan part number) or any K11 1.3 NATS ecu can fit ?
Mine is 23710 74B63 and il find many 23710 74B62 or 23710 74B61...
My turbo is not installed yet. ;)
Here is a (bad) video of first and second gear. You can see AFRs....
It's good on very high revs but on WOT from 0 to 6000 it's too lean i think...
Any ideas on my problems: my CG13 runs too lean on WOT (13.5/14 Afr).
Timing is ok.
New spark plugs.
I'll test the fuel pressure... (Bought a gauge on amazon this morning).
My engine vibrate: rear engine mount is dead, I need a new one ! :D
Yes i know that, don't worry, the turbo is not installed, i have to weld the home made manifold. Only gauges (and intercooler) have been installed, I'd like to monitor standard setup to see if everything is fine and... no ! My AFR are bad.
I have to find what is the problem.
Some news !
Just received my stuff, installed the intercooler and the gauges.
Waitin' for my Nistune board.
Problem: my AFR is not very good, 15@2500 to 6000 rpm on WOT...
It's too lean right?
Ignition? Fuel pump? Tb?
I've tested with afr sensor on lambda plug + lambda emulator to ECU.
An...
Thanks for your responses guys,
To begin this project, i'd like to test with GA16 throttle body + GA16 injectors + ecu N/A tuning to see the CG13 reactions.
I have to weld a bung on my stock downpipe and find how to connect the GA16 throttle body on the k11 loom.
The problem is: I must weld...
Hi MSC ! :)
I'm Chris from France and i will try to present to you my
cheap turbo project (maybe the first in France ?) on my 2000 K11 CG13DE.
(i hope you understand my "frenglish"...)
This car is a "test car" to learn "turbocharged=>NA ECU tuning", welding...
I've got some pieces from other...