I had the same feeling as you. since I had Micra K11 before. when I start my K13. the engine rattle at idle, especially after running a while. I even changed all the engine mounts ( thankfully it's cheap to source it from China). the rattle getting much better, but still have some light rattle...
When installing the 252cm disc they are hit when the disc becomes hot. that is why I turn it down to 248mm. the thickness of 252 is 22mm and the 247 disc is 20mm. if you want to use 247 discs with this caliper you maybe need 0.5mm thickness of washer or don't even need. I use the ABS version...
I got the car inspected today. all passed. the front brake has 2.0 kN brake force. rear 1.4 kN.
the setup I use now is the Stake brake pad. ABS version brake disc (252mm/20mm) turns down to the 248mm. with the washer 1.65mm, the disc set in the middle of the mounting bracket. master cylinder...
I got my from N15 Nissan Almera 1.6 1998 model with ABS. the disc is bigger.
I don't remember where but I read that if you mount the caliper and disc with those calipers and 252mm discs you may grinding the discs when they are hot.
Hi LiamC. thank you!. I ordered a pair of 252mm and 20mm Disc. I will post some pictures later.
The caliper have a 3L and 3R stamp on it. sandblasted and now paint yellow. we will see how it will fit. hopefully nothing gridding around.
Sorry for digging this old topic out again. But I really need some help from you guys.
Recently I got 1 set of calipers from N15 Nissan Almera 1.6, car build on Aug 1998 Japan. including mounting bracket and almost new pads and discs.
I thought the car is a None-ABS model.
But on the calipers, I...
Good evening
Hello from Sweden.
I'm a new Micra owner. really like the car. it is K11 2002 1.4
bought the car have 160000 KM on the clock. No AC, No ABS
So far I did some maintenance on the car.
Oil+ oil filter
Gearbox oil
air filter and vacuum filter
power steering fluid
Brake fluid
Coolant...