T4mation's latest activity
-
T4mation replied to the thread Micra no start!.Be the earth & solenoid wire you need to check because the starter circuit All looped even be looped to alternator . -
T4mation replied to the thread Micra no start!.There a guy done a yt vid of what to test on a micra, he shows how to start it from the fuse box relay. I know you said it goes you...
-
T4mation replied to the thread Micra no start!.Did you check the black starter fuse /relay under the headlight fuse box
-
T4mation replied to the thread Micra no start!.burnt wires, could even have a fault inside not allowing it to crank over There a common known problem so don’t rule it out.
-
T4mation replied to the thread Micra no start!.Don’t forget to check this on back of ignition barrel
-
-
T4mation replied to the thread Micra Urban Van..Don’t forget some seats have pads in sparky so if someone’s had the knee in seat it can send the lights on not just the pre charged...
-
T4mation replied to the thread Micra no start!.No problem start with earths then go to wiring from battery to starter. If it does end up being bcm there’s guy on google in Norfolk who...
-
T4mation replied to the thread Underseal...hmm..It was used years ago on a lot of old classics same as using old engine oil. Underseal with added wax oil is ok to . Look at dinatrol...
-
T4mation replied to the thread Micra no start!.Yeh clean that up with wire wheel on a drill . if you use search at top right of forum type k12 earth it should show you posts with...
-
-
T4mation replied to the thread Micra no start!.Clean all the earths on both inner wings behind headlights There’s one each side Under 10mm bolts & the one from alternator to body...
-
Lowering of my Micra vehicle. Was done with E10-63-010-01-22 Eibach Pro-Kit Federn für Tieferlegung NISSAN MICRA III...
-
T4mation replied to the thread Will not start.Ok update post once you got it back.
-
T4mation replied to the thread Will not start.Pull the air box off give it a few Very light sniffs of easy start or linx deodorant see if it fires up & stays running. I’ve heard that...
-
New users could have to wait for approval. Sign up could have improved human checks, even dumb questions like "how many wheels for the...
-
T4mation replied to the thread Alloy wheel bolts Q.Cheers vexorg Seats the same taper so I’ll give them a test fit this week, even buying new aftermarket alloy studs there the same...
