Recent content by -SS-

  1. S

    Ple help: K11 1.0 auto (2000) = jammed ignition barrell

    Ok so I spoke with Ed at Fusion just now. I think the plan will be as follows... 1. Get replacement barrel with key + Siemens immobiliser box thingy 2. See if we can simply replace the barrel and keep original immobiliser box + attach original key on inside of trim next to transponder so car...
  2. S

    Ple help: K11 1.0 auto (2000) = jammed ignition barrell

    Looks similarish, but I will source from a 2001 car I think just to be safe...
  3. S

    Ple help: K11 1.0 auto (2000) = jammed ignition barrell

    I will go to the car now and double check, but i think the answer is yes...will confirm in 10 mins :)
  4. S

    Ple help: K11 1.0 auto (2000) = jammed ignition barrell

    Morning Frank! :D Good point, it's for an earlier Micra, mine is a 2000/01 plate. Interestingly, on another forum where I mentioned my issue, a poster chipped in with this piece of advice: "I have worked on several of the newer shape Micra's from reg 51 plate onwards. They have an...
  5. S

    Ple help: K11 1.0 auto (2000) = jammed ignition barrell

    Ok in that case I will get the eBay item above and swap over the locks. With regards to changing the transponder chips inside the key, it's the little red or blue squares on the side of the key that I need to pick out and swap over, is that right?
  6. S

    Ple help: K11 1.0 auto (2000) = jammed ignition barrell

    So I can just change the barrel and as long as I also change the small black immobiliser box with matching one, I don't need to worry about ECU, is that right? Also, just read this somewhere, doh! :( "Whatever you do, don't lubricate the lock barrel. As the lock and key wear, metal filings...
  7. S

    Ple help: K11 1.0 auto (2000) = jammed ignition barrell

    Evening Frank, yes, I injected both 3-in-1 oil using a small syringe into the lock and also followed up with some GT85...makes no difference, lock is still jammed is at point S, but is fine if at the 9 o'clock position when I take the key out at A... I just looked on eBay and saw this lot...
  8. S

    Ple help: K11 1.0 auto (2000) = jammed ignition barrell

    Hi guys, My trusty little Micra has an issue with the ignition barrell. I believe its the barrell as both keys present the same problem. If you look at the pic below, you will see letters etched on the barrell. If I take the key out at point S, when I put it back in, it simply won't turn at...
  9. S

    Biggest size battery in a K11?

    I would like a bigger batt as I plan to upgrade the stereo and run two amplifiers, both power hungry class A/B amps. Without any additional equipment, just with lights and fogs on full and heater on max, the alternator kicks in. With a bigger battery that probably won't happen - it doesn't on...
  10. S

    Biggest size battery in a K11?

    Does anybody know what is the biggest size battery that will fit into the tray of a K11? I'm at work, and car is miles away so cannot measure etc. and I was having a look at some batts, want to upgrade the standard, tiny battery on the car. Also, what is the standard battery in terms of...
  11. S

    Will floor mats from a K12 fit a K11?

    Hello. I don't have any mats at all, I was simply asking as there were some cheap genuine Nissan K12 mats on eBay and I was going to buy and chuck them into my K11. :)
  12. S

    K11 Interior Light Assembly

    Thanks Darmatter :)
  13. S

    K11 Interior Light Assembly

    As above, the light that sits on the roof lining. I may be able to patch mine up, but if I can't I'll need a new one. I will what is inside the assembly too. Anybody has one going + price pls?
  14. S

    Nissan Micra LX '92 45k miles (tax+test) £450?

    Sold :)
  15. S

    New K11 owner, ex Toyota Supra owner!

    Hi folks, I have recently bought a K11 S ie. standard. It has no extras whatsoever and the 12v socket is there except its blanked out. Any idea if the wiring is there or will I have to add that as well as a ciggy lighter socket? :)
Top