Hi me again my Micra decided too die on me today on my way work. The flash codes I've got are 11,12,13,21,28.
I've replaced the throttle body with another I've got that I know works I've replaces the dizzy with another I've got that works removed the tape from the dizzy, I've also replace the...
Bit slow on the update but after some arguments with sealer I decided too heat the 3 separate sheets while I had them bolted together. (pictures will be build orderish)
So once I'd heated the boards and refitted I noticed the throttle response is much better I do have a slight bit of resistance...
I ended up going out on a whim and I bought a £2 nylon chopping board from asda last night. I decided too make 3 separate spacers there all a 1/4" think so I've used all 3 I've fitted them along with the a tb I've modded took her for a test run. Its defiantly going better but I'm waiting for the...
Yer all I can find is people talking about it but no images don't wanna start making what I think it would be and just waste my time haha 3" is quite thick would that make the body protrude into bonnet?
Sent from my U7 Plus using Tapatalk
Hi there I'm after some images or info ebb's throttle body that he made made up way back when as all the images are dead now and info is fairly had too find apart from what in can see on here and on his site any help would amazing thanking you all muchly
Sent from my U7 Plus using Tapatalk
You can buy duralite duel USB ports for cars now I fitted one in my Micra with no problem as the wiring was there already even though my model had no ciggy lighter
Sent from my U7 Plus using Tapatalk
Depends on the budget tbh nistune would be the obvious option or you could go down the piggyback route and get a 1.4 ecu re flashed with a new map, I'm currently looking buying a old apexi safc for mine so I can have a fiddle while saving up better parts
Sent from my U7 Plus using Tapatalk
I've found that changing my plugs for bosh super 4's and some 8mm leads makes mine pull a lot better and gave the car alot nicer sound I've not modified the exhaust system at all apart from welding a tip on, I also found the induction only really helped once I removed the rev limiter there's...
Yer I've changed the fuel filter I gave the car a complete service including engine flush when I pick up the car the other week, the old filter was quite bad the the fuel in the filter was rusty colour when drained into a pot would it be worth me disconnecting the maf on the way home too see if...
Hi I'm new here just looking for other options on my fault any help would be gratefully received :)
Anyways my 96 p reg has developed a slight judder or even a slip as such when under heavy throttle ie if you boot it in second its hesitates like its not getting enough fuel or something, I've...