Recent content by PeterC

  1. P

    ECUTalk Consult LCD display

    check if obd scantech has it? otherwise ull need to buy datascan, or just do it manually - choose speed in ecutalk, check to log, do you 0-60, and then click on the gauge to stop them, go and open the file and subtract the time it says 60 from the time it first says a number > 0, and there you...
  2. P

    ECUTalk Consult LCD display

    it should work - have you checked for the consult port?
  3. P

    ECUTalk Consult LCD display

    yes, the discount is still available, purchase links are in post #48
  4. P

    Nissan Consult advice!

    yeah i guess checking batteries would make your finger sore.... but you can still check the each card for the card type/date
  5. P

    Nissan Consult advice!

    you should probably list what diagnostic cards you have (i.e. specific date, should be on back of card, e.g. EE89 or something) and how long each battery holds charge for, because some people may be after it just for these things.
  6. P

    ECUTalk Consult LCD display

    i get all the boards assembled elsewhere, itd be a nightmare to do yourself (take 5 hours to save £10), and half a nightmare to write up the soldering steps/support people when they do it wrong. some of it is SMD also so not even i can solder up a full display myself. they are on ebay often...
  7. P

    ECUTalk Consult LCD display

    firmware updates available, v2.02 back in sep added Alerts (using onboard buzzer/flashing on screen) and Adjustments (of fuel/ignition) and v2.03 out now adds total trip stats recording (not just current trip) and now Adjustments are active when on main sensor display/trip meter screen (in v2.02...
  8. P

    [SOLD] ECUTalk Consult Display for sale

    ECU are read-only and cant be permanently adjusted without a daughterboard, however with this display with v2.03 firmware, you can adjust fuel or timing across the board, and the adjustments are applied whilever on the main sensor/trip meter display screens see this thread...
  9. P

    [SOLD] ECUTalk Consult Display for sale

    get the new owner to contact me with their details (as i will be sending out update on v2.03 firmware soon - adds long term trip meter (not resetting when turned off) and adjustments applied whilst on main display (not just adjustment screen).
  10. P

    Nissan Consult advice!

    you wont find any info on the actual consult on the internet. to find anyone who does anything more than 'just uses it at work' is about the most u can hope for. try trace where the button input goes and see if that helps. ive traced it to the top right contact (when looking from topside) of...
  11. P

    Nissan Consult advice!

    what do you see once it is powered up? possible to record video of it? ive got a consult1 unit somewhere (i actually need a new battery if you know where to get one?)
  12. P

    ECU Talk Interfering with Radio Signal

    take a look here: http://www.ecutalk.com/consultlcd.aspx
  13. P

    ECU Talk Interfering with Radio Signal

    ive had about 10% of users have issues with radio interference - the problem is some cheap (and expensive) radios dont have proper power supply filtering, so the use of any switching power supplies (as in the first batch of ecutalk displays) connected to the car may cause interference to the...
  14. P

    Consult info

    cool. yeah those chinese consult interfaces are hand assembled and theres often errors in assembly, wires to the wrong place on the connector or similar, shame the ebay sellers and/or manufacturers dont bother to test them
  15. P

    Consult info

    i know this is an old thread, but if u still havent fixed it, and your car is indeed "K11 SR20DE converted" then id put my money on your consult port not being wired up to the ecu (ie wasnt properly done in the conversion)
Top