I'm after a triggerwheel setup for my K11 1.3 dizzy engine, just exploring options at the moment. I came across:
https://www.ikengineering.co.uk/flywheels
Is it possible to fit the flywheel for the coilpack engine and then add the sensor there, or is that a bad idea?
Thanks, I think what you're suggesting isn't Coil on Pack? If so is there anything to be gained going CoP. I don't mind putting a bit of work in, but happy to go with a simpler solution if there's no point.
Is there a particular Ford module I should be looking for?
I should check the...
Hello,
I have a Micra engine sat on my garage floor ready to start the process of moving it into my Mini. I have most of the bits, including a set of ZX6R throttle bodies and an OMEX 600 ECU to run it all.
What's involved in removing the distributor and letting the ECU look after...
Oh right, so they grind the cam so it's smaller, but the right profile, then the shims get you the valve-lift back?
Yes, it's a piper cam, will look at the autosprint ones too.
Just came across Larkspeed offering a +12hp fast road cam on an exchange basis. Does anyone have experience of these?
Knowing how cams worked I'm surprised you can do this on an exchange basis as you need to add metal to increase lift or duration - Do they remove the lobes and put new ones on...
Ha ha, yes it is! Let me know what else you need?
I need a few weeks to get it moved into my workshop before any mechanical bits or anything that'll let water in can go, but other than that I have everything apart from the engine, electrics and drive shafts ready to go.
If you're in Newcastle i'm nearby and have those bits. I have a Micra that is donating it's engine to a Mini, so have everything apart from an engine and ancillaries.