Recent content by oikealle

  1. O

    GA16 DE Pictures

    Thanks thanks Fran k
  2. O

    GA16 DE Pictures

    Anyone got any blogs or details of this conversion? im thinking of getting a ga project underway. Thanks fellas
  3. O

    1.6 K12 R16 - burning smell from under the bonnet

    burning hello pal, the mil light I meant only if you start it whilst venting the dust and brake cleaner, but on thinking about it just douse the brake cleaner in to the crank sensor hole and replace the sensor or the light will come on, if you dont have a scanner to erase the fault it might be...
  4. O

    Reversing Light Not Working

    Hello pal. The fuse is in the ipdm . Take out the nsf headlamp and youll find a cream coloured box with 4 tabs lift it up and turn over there u will see the fuse for back up lamp. No nnot common on k12. Hope that helps u
  5. O

    Needed: Pictures GA16 water pump cut

    I was thinking of building one pal. So is it more or less a straight swap? Thanks for your help
  6. O

    Turboing a K11

    weldels Hey lads when I looked into this years ago I found some thing called Weld Els. They are easy sections u can weld together to make a tubular manifold, from usa. Google it might be what u need.
  7. O

    Turboing a K11

    Legends! Ive been trying to do it for bloody years haha, never get round to it. Going for an sr20 de long term project but in the meantime im going to build a ga16de k11. Can anyone shed any light on this gA ENGINE SWAP? CHEERA LADS BEN
  8. O

    Reset MIL light now poor running

    Ive had this fault before on post 99 k11,s the eccs system is totally different to pre 99 k11 due to emssions under the European directive. I have done poss around 20-25 k11 over the years with Hitachi maf / tb assy, the fault was always this. Early mafs had the solder break up, the Hitachis...
  9. O

    Reset MIL light now poor running

    Hi there, The throttle body, check if its a Hitachi, if it is then thats your fault. People sometimes dont think outsoide the box :wow: I guarantee replace the throttle body and it will cure it, bad thing is they are mega bucks. Scrappy best bet. Any help needed im here
  10. O

    k12 not starting HEEEEEEELP

    P0171 IS COMMON ALSO, IF YOU GET A FRONT O2 SENSOR GO DOWN ON K12 ITS 99% ALWAYS THE REAR SENSOR ######ED AND BACKFEEDING. YOUR VOLTAGE ON HO2S1 - FRONT SENSOR WILL PROB READ About 2 volts. unplugging the rear sensor restores normal operation of the front sensor, it switches 0.2-0.8v ok.
  11. O

    k12 not starting HEEEEEEELP

    Damien have you checked the chain tensioner for protrusion? If the plunger is out by more than 10mm its a chain stretch. Sorry about your bad experience with nissan, im a nissan master tech and sadly not all nissan dealers have master techs hence the poor diagnosis. Any probs and your still...
  12. O

    Basic 1.0 model 2005 - fuel filler cap won't open

    ELLO THERE, CABLES SIEZING ARE VERY COMMON. BIT OF A BALL ACHE TO FIT. YOU WILL FIND IT S POSSIBLY COME OFF AT THE FILLER END. rEMOVE REAR SEAT BENCH (JUST PULL UP) AND YOU WILL FIND THE CABLE, IM SAURE A JOIN EXISTS THERE BUT I COULD BE WRONG. WE USED TO DO ALOT OF THEM AROUN 05-06 REGARDS BEN...
  13. O

    Gears stiff/ key fob reprogramming

    ello fella whats Nissan quoted you to :laugh:code the keys in? Remember your original one has to be recoded with the new one. If you take your V5 and proof of ID to your local dealer they will get you the Nats code. You will need the nats pin to get the aftermarket code. Look in your glovebox...
  14. O

    1.6 K12 R16 - burning smell from under the bonnet

    No mate, it wont go, its stuck in the bellhousing of the box, the only way is to take out the box and clean it. its deadly that stuff so dont try blowing it out unless you wear a bloody good facemask. One option is that you take out the crank sensor from the bellhousing, its a green plug and...
  15. O

    Needed: Pictures GA16 water pump cut

    hi Jeroen, just out of interest matey what driveshafts and hubs u using, might build one for a work commuter!
Top