Recent content by novocaine

Don't know, but wouldn't be surprised if it was, only one way to find out.....

Yes comp can be removed. Don't go near Halfords. Find a real radio place if you can't do it yourself. If you are going for a screen, You will need to find a double din dash surround on ebay There are some from China available new but they aren't direct replacements and need some modifying...

Windscreen is a different angle on the cc which changes the shape of the door. I could believe the mirror backplate is different.

It was one of the reasons the previous owner of my car was selling up cheap, I didn't have the heart to tell him the solution. 🫣

Open door. 2 big bolts that hold the catch. Undo partially and push the catch back. Though down though the catch hole and you'll see a pin sticking out. It shouldn't be. Use a tyre lever to push it back in. Do up the bolts and have silent locking again. There's a few posts on here about it...

Jb weld is overkill and as you say, will stick it permantly. With something like 638 you will have a fair bit of time to fix them in place and the bond can still be broken with a wiper puller. Adding a bit of heat with a hair dryer will also break the bond. They are meant to be a taper seat so...

There is no thread on the wiper arm. If you mean the knurl inside, clean it before refitting, that doesn't work use some shim stock (thin metal) or some bonding loctite something like 638 when installing the arms.

https://www.ebay.co.uk/itm/325392788049?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=_z9zYpC_SmW&sssrc=4429486&ssuid=l7_5w4uuSpG&var=&widget_ver=artemis&media=COPY

When did you last change your pollen filter?

https://www.ebay.co.uk/itm/295808630282?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=axkricaitns&sssrc=4429486&ssuid=l7_5w4uuSpG&var=&widget_ver=artemis&media=COPY Or just the link arms...

There is no bulb fail detect circuit. There is no canbus on a k12 that connects to the lights in that way. The relay works on the amps drawn from 3 bulbs (about 1.2 amps) , when one bulb goes out the amps drawn goes down and the lights flash quicker. (There's a bit more behind this as it's to do...

Whole door card. It's a one peice unless you want to be brave and then you need to remove it all anyway as its staked from the back.

Breakers yard for a new door card. Search ebay for micra cc breaking.

Rear spring corroded isn't worth dealing with, it will never be a fail until one snaps. Isn't technically an advisory, but some places put it as its an easy job they can charge for money for. Brakes, do as suggested. Soon. New fluid and a seal service won't go a miss. Ball joint, service...

did you torque the bearing to correct torque? are you sure you put everything back as it should be inside?