Recent content by Micranha

  1. M

    Turboing a CGA3 Micra

    Yes, you've got a point! Sent from my SM-G925F using Micra Sports Club mobile app
  2. M

    Turboing a CGA3 Micra

    I have to put only ev6 injectors? Sent from my SM-G925F using Micra Sports Club mobile app
  3. M

    Turboing a CGA3 Micra

    Hi all'! I was thinking about a future project of mine, a Micra CGA3DE + T. Now, what I Will need for the best increases? These are my Ideas: - turbo - exhaust manifold - intercooler and air tube feed - new ecu - bigger injectors - tube for oil feed What kind of turbo shall I use? And...
  4. M

    Rear axle disc - k11

    Hi everybody, I'm looking for a rear axle disc for my micra, if someone has one spare or on sell, write me! I'll need a post to Italy! Sent from my SM-G925F using Micra Sports Club mobile app
  5. M

    Qg18 throttle body and fuel rail on a CGA3

    ook, i'd like to ask 2 for questions? 1) what's the original t/b bore? 2) anyone know QG18 t/b bore and if is it difficult to fabricate an adapter plate? many thanks
  6. M

    GA16de airbox piping?

    Because it's probably the best gaining in vacuum for k11 Sent from my SM-G925F using Micra Sports Club mobile app
  7. M

    Qg18 throttle body and fuel rail on a CGA3

    I think the footprint is the same fr CGA3 and CG13, so i suppose i can fit the GA16 one. My only doubt is about sensors, beacuse mine are earlier and different (Bosch)....
  8. M

    Qg18 throttle body and fuel rail on a CGA3

    Instead, the GA16DE t/b can be applied to cga3 micra? Because they've different maf Sent from my SM-G925F using Micra Sports Club mobile app
  9. M

    GA16de airbox piping?

    That seems very standard! Where did you place the water tank? Sent from my SM-G925F using Micra Sports Club mobile app
  10. M

    GA16de airbox piping?

    My GA16DE airbox was taken from a Primera with its tube. I've just eliminated the resonator and placed as the Micra one. Resonator hole has been closed with a cap and an o'ring and sealed with silicone. Sent from my SM-G925F using Micra Sports Club mobile app
  11. M

    Qg18 throttle body and fuel rail on a CGA3

    Hi everybody, I was thinking about replacing my stock t/b with a qg18 one. It Will directly fit? If not, which modifications I have to do? I Think qg18 Maf can communicate with stock CGA3, but other sensors? I have qg18 fuel injectors with rail, can it fit directly on cga, with a aftermarket...
  12. M

    Help! Ga16 airbox

    If you check on nissan part catalog, you can see they've different codes Sent from my SM-G925F using Micra Sports Club mobile app
  13. M

    Help! Ga16 airbox

    Attention because Primera GA16DE airbox is longer than an Almera one! It Will fit on throttle body, but is too long to put a tube for air straight in front of the car. I fitted a Primera one, using the Primera stock tube, eliminating its own resonator and placing the tube as Micra one. Sent...
  14. M

    Coil Packs

    Hi Peter0003, I suggest to disconnect a different coilpack every time you run the engine and feel the difference. When the engine Will run same as usually you'll find the fail coilpack. I hope I helped you Sent from my SM-G925F using Micra Sports Club mobile app
  15. M

    QG18DE injectors on CGA3DE

    Okay, but the old one Will not have a leakage? Sent from my SM-G925F using Micra Sports Club mobile app
Top