Recent content by matth444

  1. M

    K11 Overheating

    Probably worth mentioning it's a Y Reg, second facelift.
  2. M

    K11 Overheating

    Hi all, Micra has been overheating quite frequently this last few weeks. Has been typically either when sat in traffic or doingmore than 65mph for any length of time. Yesterday started overheating pretty much at any speed except a weird sweet spot between 55-65 mph so possibly getting worse...
  3. M

    No brakes after pad/disc change

    I don't THINK I've been too rough - did a very quick go with some 1200 and 2000 wet and dry on the rust patches. If I've taken too much off the pistons it would be leaking right? To be honest im not surprised it's ended up like this though - was planning on buying some refurbed ones but thought...
  4. M

    No brakes after pad/disc change

    Hi guys Have been fitting some new discs and pads to the Micra. Took everything off, had trouble retracting the piston so removed the piston and used some fine sandpaper to get the rust off, then retracted fine. put everything back together and now I have no brakes. Engine off, pedal is stiffer...
  5. M

    Breakers in Sheffield

    Hey guys, Anyone recommend any decent breakers round Sheffield area that I might have a bit more luck looking for some of the harder to come by K11 mods (tachometer, tweeter a-pillars etc)?
  6. M

    K11 running poorly..still :-(( losing hope...

    Have a similar problem here.... Y reg K11, 50k miles, no problems until started idling rough and stalling when sat at lights... changed the MAF and throttle body a few weeks back and still has same same dreadful rough idle, as if I'm just compressing and decompressing the accelerator. Seems to...
  7. M

    K11 - 5dr regulator on a 3dr?

    Hi guys! I am new here and have recently encountered a problem with my K11, Y Reg 2001. The front passenger side window regulator is bent so I need a replacement, however it seems a used regulator for a 3dr, electric window model such as mine is hard to come by, and a new one costs a lot more...
Back
Top