Recent content by Mad Yax

Time to get back to this. Ill be making a adjustable Panhard rod today to center that axle its about 3 inches to the right at the moment. Also today I'll be getting the 1.3 ECU to properly test out the the new engine. Sent from my VOG-L09 using Micra Sports Club mobile app

Ok so I'm good on that front I think. Should I replace dizzy? Was working fine in doner car?! Sent from my SM-G920F using Micra Sports Club mobile app

Hey guys, I've been over threads and can't find one specific to this issue. Last few days have been very tough trying to diagnose a problem with no luck. I have put in a new 1.3 Dizzy into the 1.0 car. On startup I get a click at the starter but no turning over. I have "jumped" the car by...

bull the bullbar is 20mm steel conduit (same as roof rack) just bent the four corners and welded two supports to the bottom 90 degree bends. The tubing is drilled and bolted to the top of the chassis. by chance fit nicely though the bottom "vents" in the bumper. I wouldn't want to hit a deer...

Got these old mounts out of my doner and cast a polyurethane mix. They are a lot harder that originals and will be a nice addition for a 1/3 of the price of aftermarket mounts. Will be putting these in with the new engine. Sent from my SM-G920F using Micra Sports Club mobile app

A few things that I really enjoyed and got attention was the steps on the back, bull bars and the intake made from cat food tins [emoji23] Sent from my SM-G920F using Micra Sports Club mobile app

Hey our k11 was a mad max inspired rat rod for offroading. Our Insta might give you some inspiration. All rust was done with a grinder and unicorn piss. Used a lot of electrical equipment from work for bull bars and roof rack and such. Sent from my SM-G920F using Micra Sports Club mobile app

Did the Mongol Rally in mine last year. Front springs from a Lexus IS200 will fit the back and raise it a nice bit. I never raised the front just put a 3mm steel sump guard and drove the hell out of it. River crossings desert mountains the lot not a bother up front on the standard springs. We...

Has anyone seen or attempted a Chop Top like this Mini. I'd love to do my k11 Rat. Obviously there's a lot of structural work involved. It's not a daily at all Sent from my SM-G920F using Micra Sports Club mobile app

Put together some temporary bomber seats for the rat till I get my dimple die and hole punch set. Sent from my SM-G920F using Micra Sports Club mobile app

That's very tidy! Sent from my SM-G920F using Micra Sports Club mobile app

So my current set up is a facelift CG10 Gearbox. I sliced the bottom off it somewhere in Tajikistan and would be keen on replacing it while doing the CG13 swap (from facelift) However I'm looking to keep the gears from the 1ltr to keep it responsive. The plan is to take the 1ltr gears themselves...

Ah sound. Crackin site that is. Been on to autostyling they are doing 25% off JR wheels next week so saving over 100 quid delighted. Aye that'd be a good buzz once I get her set up Sent from my SM-G920F using Micra Sports Club mobile app

These are the shoes for her. Not 100% on how they will fit has anyone had 15x7xE20? While lowered? Sent from my SM-G920F using Micra Sports Club mobile app

Save you the click Sent from my SM-G920F using Micra Sports Club mobile app