With the injectors am just going to place each one in bottle with rag in it to see if squirt. If not then it will point to camshaft sensor. Have bought a second hand set of injectors to plug in and connect to fuel feed. saves having to disturb mine on block. If they squirt then its injectros if...
Cheers for that, at moment there doesn`t seem to be any fuel in the cylinders as spark plugs don`t smell of fuel or wet. Could be I have just bought a dud camshaft sensor. Buying a new one could sort it but by removing injectors and seeing if they squirt is positive way of making sure. Just got...
Tried all but bump start as your not supposed to bump start injection engines, they work in a different way to the old carb cars. AA is quite expensive to buy. Going to remove injectors as one last try and turn engine over to see if they squirt, then try a new sensor to see if one I bought is...
From my experience it`s seems to be worth buying a dedicated reader hard wired and not bluetooth or wifi. I`ll have to stick to older cars with dizzies, rotors and HT leads or even further back, condensers and points in the future :)
Code reader is a Proscan Automotive one using car Doc App on phone. I have to say I`ve always been horses for courses in other words buy a proper reader that just does that like Autel 629 but they are expensive. When plugged my other cheaper scanner in it also came up with no fault codes after...
Cheers for above in formation, have been through alot of above and recent scan for faults is showing now zero faults so car should start but doesn`t. turns over fires maybe once then thats it, good sparks etc. At the end of my knowledge of new cars. As I say thanls for reply and help
Just got myself another fault code reader and when scan car it says not fault codes found. I will say that have taken off negative battery terminal so this is what gets rid of codes. Now have scanned it it shows no codes but turns over fires couple times then stops Trouble I think is really my...
Codes are as follows
P1111 manufacturers Control
P0335 Crankshaft position sensor A circuit ( just fitted new )
P1122 Manufacturer control
P1121 man ufacturer control
P0113 intake air temp sensor 1 circuit high
p0444 evaporative emission system purge control valve circuit open
P0107 Manifold...
Hi having problems for a while now after car left standing for about month doesn`t want to start.
Replaced battery, starter motor, cam and crank shaft sensors. really strange as reliable before stood still . Plenty of fuel in tank, new spark plugs. Fuel is pumping to front of car. Strange that...