Recent content by labyrinth77

  1. L

    Micra K11 Handbrake equaliser issue

    The cable had been damaged close to the drum, all replaced and working now :) Also anyone else reading this, you literally just unhook the cable from the equaliser once you have some slack in the line!
  2. L

    Micra K11 Handbrake equaliser issue

    Hello, MOT failed because right side handbrake won't engage, In the picture you can see the handbrake engaged but only the cable that goes to the left wheel (which is on the right side) is pulled tight - the cable for the right wheel doesn't move at all or if it does very little, my guess is...
  3. L

    Nissan Micra k11 1.0 won't start (fixed!)

    She's alive!!! Absolutely singing mate, all 60 horses :D Thank you so much for all your guidance, really really appreciate your help! All the best Matthew :)
  4. L

    Nissan Micra k11 1.0 won't start (fixed!)

    Okay @frank the new battery is in, the radio is back alive, it starts lovely and I've checked the alternator as well and it seems fine(14.8v at idle). The original problem still exists, cylinder 3 misfire, now my question is - Do I replace the faulty coil with the one that I bought? my...
  5. L

    Nissan Micra k11 1.0 won't start (fixed!)

    Yeah, it's reading 7.8v at rest, I'm solar charging it now to see if the car will start again but I believe I'm looking at a new battery at the minimum, correct? I wonder if this has been the root of the problem or just one of many! Would a poorly battery bring up Cylinder 3 misfire and only...
  6. L

    Nissan Micra k11 1.0 won't start (fixed!)

    Hello Frank, Sorry for seemingly disappearing, I'd composed a reply shortly after receiving your message but apparently, I didn't post it! Basically, it explained that I was going away for a week and would report back after I returned. I have since returned and the problem has only worsened, I...
  7. L

    Nissan Micra k11 1.0 won't start (fixed!)

    Hello! My 2002 Nissan Micra K11 1.0l 60hp car won't start, my OBD reader said that cylinder 3 wasn't firing so I swapped the ignition coils over and the fault follows the coil from cylinder 3, so I go and order a second-hand coil online(it's OEM and the part number matches, plus has a good...
Top