Recent content by Kcirtap

Does anyone know where to source that clop that sits under the bonnet that holds the bonnet stand when driving? managed to snap it clean off ? or know what it is called to search on eBay?! grateful as always!! pat

Nice. I just paid the few pence for a new one! ?

As in heating and cooling the washer? Interesting ?

Thanks, that brill. ????

Good morning everyone! Going to change oil, filter and plugs this weekend, and was wondering if anyone had to hand, or knew, the size of the sump plug washer that is required for a micra k12 1.2 petrol? Very grateful as always, And thanks to all who helped with my brake problem a few months...

http://www.bba-reman.com/gb/content/nissan_dtc_p0335_ckps Who swapped out the clutch, was it you or the garage? You could try working through these.

I thought the brakes were bad when I got the car so put some brembo max disks and pads on. Now it feels like I can stop instantly! Thanks again.

Completed a fluid change (and changed the nipples for good measure), the fluid was not a nice colour and there was a bubble in the system . The pedal is as firm as I have ever known it which is brilliant. Hit a bit of rust trouble on the way but penetrating fluid and a hammer sorted that...

Thanks for the tip, left some WD40 on it for a while, gave it a smack (or 4) then used a thinner socket from a mate. Job was a good one. Although I have discovered one of the guide pins on the driver side caliper needs sorting as the brake is rubbing! Ah well, another excuse to tinker a bit...

Thanks Mika, I had a look at the video, which is really good, but it doesn’t show it bleeding. Gonna give it an hour of trying to get it to budge and if not I will just put in a new wheel cylinder and a longer bleed nipple. I think my problem is the rust on the drum brake parts has caused the...

I checked the big red book of lies and it doesn’t even show the rear brake being blead!

Hi, This is a follow up from a previous post earlier in the week. I am trying to bleed the brakes, and can get the front nipples very easily, (car on stands and wheel off). But the nipples on the drum brakes at the back seem to bin stuck between the bolt holding in the brake line and rim of the...

Did u put UV clear coat on over top? I sanded mine down, smoothed with T-Cut, and then gave them two coats of clear coat to make them shiny again. ☺️ If you do choose to spray them with clear coat, the UV blocking stuff stops then from yellowing again! Mine don’t look brand new, but I agree...

3, possible 4 years old. My next port of call is to change the fluid on the weekend. Any tips? And thanks.