Recent content by Jerome Carson

  1. J

    Camshaft Sensor and Dizzy to Coilpack conversion

    Anyone know where to get it remapped or what ecu to buy? It’s turbo’d ?
  2. J

    Camshaft Sensor and Dizzy to Coilpack conversion

    The Engine didn’t come with the dizzy, gearbox, flywheel, ecu etc...
  3. J

    Camshaft Sensor and Dizzy to Coilpack conversion

    Thanks Richard, I thought I did the math correct with the force from the angular velocity, the force from the magnet as well as the shear force from the stated glue, and it says it’s good for well over 10K RPM, maybe I’ll double check that... on another thought will the magnet have to be exactly...
  4. J

    Camshaft Sensor and Dizzy to Coilpack conversion

    Still need some help, does anyone have any ideas?
  5. J

    Camshaft Sensor and Dizzy to Coilpack conversion

    Hi all, I have a few questions tonight: Firstly does anyone know what voltage the signal wire from the 3 pin cam sensor should read? I am getting 0.5Mohms of resistance between signal and ground and 11.03 volts when using a 12.5V bench supply across power and earth. When i move a metal...
  6. J

    1.0 Turbo with CGA3 1.4 Cams - Lack of power!

    Thanks for the help Frank! I'm sure i'll be asking many more questions as i've just got started :sneaky:
  7. J

    1.0 Turbo with CGA3 1.4 Cams - Lack of power!

    Have you heard anyone speeduino before? especially on a K11? What did the TD05 spool at with a big exhaust?
  8. J

    1.0 Turbo with CGA3 1.4 Cams - Lack of power!

    Is it easy to remove the limiter on coil packs? I know originally i got it for my E46, but wanted to trial it on the K11 first to see if i could actually plump it! My swap a G1544 or something instead later?
  9. J

    1.0 Turbo with CGA3 1.4 Cams - Lack of power!

    Any experience on Speeduino? Also are the CGA3 cams actually the correct cams do you know?
  10. J

    1.0 Turbo with CGA3 1.4 Cams - Lack of power!

    Evening all, I am completely new to this forum but it feels like i've been reading non stop for the past few weeks on it. Its come to the point where i need to ask my own question. I have put a GT2860 (T25) turbo with a custom home made manifold and exhaust (currently only 1.5in because that's...
Top