Recent content by F3kka

  1. F3kka

    classic mini cg13 with GT1749v help.

    Nistune is one of the better options but any piggy back ecu; megasquirt, e-manage, apexi neos, dastek etc etc will work. As for where to buy nistune Ed @ Fusion Motorsport
  2. F3kka

    Blog: Autosolo/stage rally build blog

    Should have a good selection of events up there!
  3. F3kka

    Blog: Autosolo/stage rally build blog

    Also you state in your op that your harnesses are out of date, pretty sure that's fine for road rallying. They only need to be in date for stage rallying I thought, @SuperUno will confirm/deny that.
  4. F3kka

    Blog: Autosolo/stage rally build blog

    That's good news then, should be OK. Apologies for being the bearer of bad news. Looks a nice clean car, where abouts are you based? My recommendation would be to paint your tow hook red or something, now you have a big arrow pointing at it, that'll make it look nicer imo.
  5. F3kka

    classic mini cg13 with GT1749v help.

    Decomp plate would do the trick, many class it as a bodge mind.
  6. F3kka

    classic mini cg13 with GT1749v help.

    You can't rebore the CG13 enough to fit corsa pistons!! The liners are too thin. The corsa piston trick is for the CGA3.
  7. F3kka

    Blog: Autosolo/stage rally build blog

    FYI you won't be able to road rally it like that!! You need all the rear trim back in, will be fine for autosolos tho.
  8. F3kka

    1.4 or 1.3 for <£200?

    I bought one at the beginning of the year for £350. Was a cat c had been repaired and worked perfectly well but I only wanted the engine out of it so it didn't matter. I agree with these guys that your budget is too low you won't get one that cheap but they are about you just have to know where...
  9. F3kka

    SR20DET fuel rail/injectors needed

    I've pm'd you @kamz 2015
  10. F3kka

    SR20DET fuel rail/injectors needed

    Yes, I do @kamz 2015 . Fuel rail cut to suit micra too!! Was thinking of making a for sale ad this week but can't decide how much they're worth!! Make us an offer
  11. F3kka

    Fitting bucket seats

    You could mount it using some universal bucket seat mounts, £30 on ebay, which will bolt directly to the floor. But as Steven says you'll need to use load spreader pads on the under side of your floor.
  12. F3kka

    K11 Micra central locking (actuator)

    Here's a picture to check @Abaaba , bottom right is the drivers side one.
  13. F3kka

    K11 Micra central locking (actuator)

    I have one for a 3 door @Abaaba are you sure they are different?
  14. F3kka

    what did you do to your micra today ?

    Found a modded fuel rail in a box of spares that came with the micra when I bought it many moons ago. No need for it so I'll create a for sale ad soon. But just to confirm, purple side feeds are 370cc SR20DET injectors aren't they??
Top