Tailgate handle rubber seal, Micra K11 Mk2, 2002

I noticed the tailgate handle was loose on my k11 (in UK) as shown in photos. When i took it off i found the rubber seal around the top was perished and hanging off. Whats it called, T-profile seal strip? Ive posted a picture of the end profile of the rubber that came out, it had glue on 1 side originally i think.
Has anyone found anything to put around here to seal it and hold handle firm again? I found second hand seals for crazy money on ebay, but im sure something a lot cheaper like U profile rubber would do the trick? I've tried P profile draught excluder but its not sealing.
Could use silicone sealant i guess, but it would look a mess. Got water leaking into the spare wheel well now.
Any suggestions welcome.
Thank you.
 

Attachments

  • Polish_20211009_204909918.jpg
    Polish_20211009_204909918.jpg
    732.9 KB · Views: 158
  • Screenshot_20211009-200726_Gallery.jpg
    Screenshot_20211009-200726_Gallery.jpg
    813 KB · Views: 135
  • Screenshot_20211009-200652_Gallery.jpg
    Screenshot_20211009-200652_Gallery.jpg
    782.5 KB · Views: 143
OP
OP
Mushepea
I have bought some T-type 7 x 5mm rubber strip, I will let you know how it works when i get it. It will leave a 5mm black rubber strip showing around the top of the handle, but if it stops water getting into the boot it'll do.
 

Attachments

  • Screenshot_20211010-095540_AliExpress.jpg
    Screenshot_20211010-095540_AliExpress.jpg
    439.9 KB · Views: 131
  • Screenshot_20211010-100149_eBay.jpg
    Screenshot_20211010-100149_eBay.jpg
    365.9 KB · Views: 131
I noticed the tailgate handle was loose on my k11 (in UK) as shown in photos. When i took it off i found the rubber seal around the top was perished and hanging off. Whats it called, T-profile seal strip? Ive posted a picture of the end profile of the rubber that came out, it had glue on 1 side originally i think.
Has anyone found anything to put around here to seal it and hold handle firm again? I found second hand seals for crazy money on ebay, but im sure something a lot cheaper like U profile rubber would do the trick? I've tried P profile draught excluder but its not sealing.
Could use silicone sealant i guess, but it would look a mess. Got water leaking into the spare wheel well now.
Any suggestions welcome.
Thank you.
Try the company below, you might be able to match it up?
 
OP
OP
Mushepea
I have applied the T shaped rubber seal and it is all good as new. It was a bit tricky to get the rubber to go over the edge pf the handle esp around corners, but used a thin piece of flat plastix to pop if over the edge.
 
OP
OP
Mushepea

Attachments

  • Screenshot_20220405-021411_AliExpress_1.jpg
    Screenshot_20220405-021411_AliExpress_1.jpg
    210.7 KB · Views: 86
OP
OP
Mushepea
Here are pics of the seal, just like new.
 

Attachments

  • 20220405_114341.jpg
    20220405_114341.jpg
    1.6 MB · Views: 117
  • 20220405_114445.jpg
    20220405_114445.jpg
    1.7 MB · Views: 105
  • 20220405_114434.jpg
    20220405_114434.jpg
    3.6 MB · Views: 110
  • 20220405_114455.jpg
    20220405_114455.jpg
    2.2 MB · Views: 112
Top