TPS error codes following timing chain replacement

R

richtea123

Hi folks,

Just reassembled the micra after changing the stretched timing chain.

Started it up and code P0123 and P0223 which are both from the TPS saying the voltage detected is too high.

Have i plugged something in the wrong place, or do i need to do the relearn procedure stated here:

https://www.micra.org.uk/threads/ha...al-position-or-throttle-valve-position.66422/

I did clean the throttle body whilst it was off the car as it was fairly dirty, so this might have upset things, but I'm surprised by the code which says the TPS voltage is too high???

Thanks
R
3f81f77925a2855425fdcec31e659f55.jpg
b2bd0e0b413eb0ecfe2aabca6e0b1a16.jpg


Sent from my SM-G960F using Tapatalk
 
Useful information :cool:
Out of interest had the old chain stretched or was there broken rollers in it which would make it loose? (I do hope that you fitted new sprockets as old worn sprockets will wear out a new chain very quickly)
 
Last edited:
Thanks for letting me know.
That was one of my first purchases for me I was very disappointed when it did not connect.
Then was told my product was faulty.
I'm yet to decide if my needs are for BT device or go. Wire route as they seem to be more simplified.


Sent from my ASUS_T00P using Micra Sports Club mobile app
 
turning it off and back on again seems to help a lot of things

I know that you're supposed to unplug it while setting the timing, so it was likely something to do with that that caused your error codes
 

Similar threads

A
The Dreaded - Timing Chain curse
Replies
1
Views
2K
frank
frank
K
Timing Chain replacement or cam sensor? 103K mile 1.4L
Replies
2
Views
1K
kano
K
P
Timing chain problem, change of timing chain on Micra K12
Replies
1
Views
2K
Master tech
M
B
Micra k12 1.4 Timing chain sorted......new problem, can anyone help please?
Replies
9
Views
5K
frank
frank
dtmwelburn85
k12 1.0 not starting after timing chain replacement
Replies
1
Views
1K
Paul1986
P
Back
Top