Blog My 1997 March Cabriolet

Andy_S

I Love Booooooost!
Club Member
Hi let me be the first to do a new topic. This is my March Cabriolet as she is right now

1.3 Manual
16x8 Rota Cups
BSR Coilovers

1c25d5baeee3d8f9f6cdbf8d6e287649.jpg


Top one in below pic is going to be a trailer ;-)

d35c0dfc5d273ea6859fa685b4194384.jpg



Sent from my iPhone using Tapatalk
 
Last edited:
OP
OP
Andy_S

Andy_S

I Love Booooooost!
Club Member
So here is a timeline of the cabriolet.

Bought my 2nd cabriolet because the first one I front ended, repaired kind of but with the 2nd being manual it was a no brainer.

4b14aea65fdab47db9ab19a56a14f958.jpg
how I bought her

8c1ac4eadd79489100358a5efe507b79.jpg
transferred my starmags over to her

9b0805f96d170b08dcd11db99f54724c.jpg


fff306350ac3512d0cfeb6af4c06ec0b.jpg
had the roof retrimmed as some of the stitching had worn off due to age and was leaking in.

00b6d7521f38508451ebd3396fea348a.jpg
then I decided to turbo it and changed front bumper for a k11c model

6fa0da0e95bc099672358640c9da4dbc.jpg
custom front exit exhaust whilst doing the turbo build

882bcf6c19f99854cb194c9eefab5ee8.jpg


fb9fe7a7c12be809d25d5860945b9f61.jpg


At this meet it grabbed all the attention

At that meet though I did blow the engine :-( so out came the engine. I blew the turbo as well!! So it's got a standard 1.3 engine in it at the moment.

c6645f6ce47dc8fc6ceb292da5c434e3.jpg
bought new set of wheels. (2nd hand but new owner) and fitted the BSR coilovers. Sat way too low so adjusted them. Looked good but couldn't turn at all lol!

477797d711cd0b6b7fe0695c250cc923.jpg
had to adapt the exhaust to fit the turbo manifold as I had no turbo! Then covered the mess with this custom stainless steel heat shield
b83ef954fa1a2655116a076e0ea229ec.jpg
as you can see I also painted the engine black with blue rocker cover and other blue bits.

fd8d6bd2e1fe287330ebb8957ee3f8b3.jpg


Original bumper back on with exhaust cut out

e40361926191b24fef477d07b04e29dc.jpg

038b12c25e3fc8fbc21488506467bfe7.jpg


How she sits today. Going to spray that rear surround same colour as the car or might keep it chrome as the cabriolet will be painted white soon! This is due to the paintwork being so thin in the first place when we detail it we might go through the paintwork! (Used a paint thickness gauge)

e0e9729bcdd491ee4f0644818f8aa7bf.jpg
85609584660e2fed3e1e6172b2a82b42.jpg
f9ba9cbd825b731e9c429dd0f07c55e7.jpg
11b9e7fe792ca8f1f8b4b1c7ed441e1e.jpg



Sent from my iPhone using Tapatalk
 
OP
OP
Andy_S

Andy_S

I Love Booooooost!
Club Member
Looking good! Although I must ask: you're going to make a trailer out of a cab?!


Yes. Cut it in half in front of the b pillar.

Don't know whether to have a roof for it or not lol would have to be custom
 
OP
OP
Andy_S

Andy_S

I Love Booooooost!
Club Member
You chopping it because its knackered ???

I never fully repaired the front end after I rear ended someone. The rear sills next to arches need work and I've no use for it. I always wanted to do the car and half trailer project and with this one it will prob be the only one in the world made from 2 cabriolets.

Plus yes I can sell some spares to fellow cab owners for less than getting them from Japan :)
 
OP
OP
Andy_S

Andy_S

I Love Booooooost!
Club Member
Lol

Ok the other cab I'm using as spares for templates for retrimming my seats. Now I've never done this before so watching and getting tips off YouTube videos. If it doesn't work I will get it done proper.

Anyhow here we are. Rear seat is in 3 sections, a top fixed bit a middle drop down bit for the boot loading access and the bottom fixed bit that you sit on.

For this I'm using evostick carpet adhesive.

So these are my top fixed rear section.
58e4e161c7b20dfdb213c698e893f0e4.jpg


Here's my roll of material. Old school members will remember this material from my first ever Micra. Yep it's 10yr old and still looks like new haha.
9886a1e2c7d27b3540a478eb99747467.jpg


Note: I've removed the original cover so I'm on foam only.

737f8837f1ae3ce277162f0d85f47dd0.jpg



Making sure it sticks down.
015de0915893146366c130a831c8e7b9.jpg


96d400f25c4a443ee30144ae46b1c772.jpg


Here is the finish. Now this has a bubble in it but since this pic it has levelled out and is looking good. I'll get a pic of this tonight.
556c085530f5265ea739176a59630d1b.jpg


Found the pic of it better than above.
b86664bb8c8076790924a99856c60f3d.jpg



So I started on the fold down section which is a lot easier as a) it's flat and b) experience from the last one.

91bba28569dc01dc60327598cd3882d1.jpg

400b39527f3e57e78f8a92070d387027.jpg

5596412996375931fba64241539e2044.jpg


The rear of the seat which needs fully covering as it is seen from inside the boot.
e8d4702277168a96d9cf7a400b659f39.jpg

141c35423ad627ea3868bb55a2cf24d4.jpg


And now I put some weight on top of the rear to make sure it all sticks for a few days then I'll get a pic of the front of the seat.






Sent from my iPhone using Tapatalk
 
OP
OP
Andy_S

Andy_S

I Love Booooooost!
Club Member
Blog Update:
Starting from the last main update the seat covering didnt work out so i used the other cabriolets seats to refit into the current cabriolet.

The GTR needed new brakes, tyres and a service at a cost of just over £4k :eek: so i decided to sell the car and do the cabriolet up to a show car spec.

First on the list was Air suspension, I bought a universal set but wouldnt fit the front tunnels so i sent the air suspension back and found a Hydraulic suspension micra over in Germany which was Scott Kingsman's. So i bought the micra and had it shipped over.
13442259_10157247603360107_6464291505117232577_n.jpg

13445296_10157247603220107_2877621834380464141_n.jpg

13495127_10157261990470107_2174814950710237839_n.jpg

13512077_10157277069250107_112819051534317099_n.jpg



I saw the Orange Speedhunters Figaro and fell in love with the scheme
Photo 15-05-2016, 02 59 00.jpg


so the paint was chosen as Porsche GT3 Orange (Code LC8), graphics custom made up, the same arches were sourced from Japan, Carbon Wrapped Bonnet with Shogun Bonnet Scoop purchased from Scotland,

I ordered an Aeroover Rear Spoiler from Japan
0120169A30140617W00101.jpg


, Seats were designed using Seatskinz Design Simulator.

Here is how she looked before the strip down,
160.JPG


So whilst all that stuff was ordered we began stripping the full car down, engine bay painted black, windscreen out, all dents smoothed out, doors off, boot off, door rubbers all off, Painted the full car, doors, inside door shuts, boot etc.

14022301_10157526731020107_4312297279693375513_n.jpg
14040064_10157517259560107_1895009972131953863_n.jpg
14045803_10157531684970107_8096744130670118020_n.jpg
14051637_10157526730885107_936171811505025395_n.jpg
14054114_10157516766050107_624323848782854010_n.jpg
14068206_10157516765865107_6042482903141364289_n.jpg
14068242_10157526731030107_5056668290375893682_n.jpg
14088629_10157531685200107_3581724800628898328_n.jpg
14095796_10157526730910107_1559028554613929365_n.jpg
14117918_10157555633000107_471414179799205948_n.jpg
14117923_10157526730800107_8987512191503234419_n.jpg

14117943_10157516765885107_6494450090953786648_n.jpg

14183752_10157603761770107_610057179434635648_n.jpg
14184475_10157577992980107_1055548761260365908_n.jpg



and made it to JAE 2016

054.JPG



Continue the Blog Later on.......
 

Attachments

  • 25-10-16 028.JPG
    25-10-16 028.JPG
    1.9 MB · Views: 421
OP
OP
Andy_S

Andy_S

I Love Booooooost!
Club Member
Before i went to JAE i had the car turbo converted at Fury Autoworx and after a few hiccups with this conversion having to put right a few things i got the car mapped by Fusion Motorsport. After mapping it acheived 141.4bhp.

17630112_10158652337920107_1467606773919815033_n-jpg.58729

22406275_10159678600815107_6266674586637460383_n.jpg

17554335_10158652365375107_3567619021411181862_n.jpg


So after JAE 2016 where i won the Trophy "Unique Modification" a lot of changes happened

21271370_10159476924965107_5385607656714603637_n.jpg


Graphics Arrived and fitted

14088580_10157561919220107_5638289113154069653_n.jpg


Arches Fitted
17634843_10158652337805107_4957006169215417504_n.jpg



Changed the Rota Cup 16" Wheels to 13" Minilites

21078315_10159456805170107_7656794182884474242_n.jpg


21151415_10159456806150107_2330520422213837672_n.jpg


Seats Retrimmed and fitted

17626590_10158652364860107_7202585688619753110_n.jpg


17554533_10158652364875107_3308611000093279823_n.jpg


18527712_10158916924505107_3957857731545457982_n.jpg

18581721_10158916925115107_658313194127798518_n.jpg

Boost Gauge and AFR Gauges installed
19113783_10159066131550107_8348121144945378756_n.jpg


21034398_10159456805045107_8528842320773174614_n.jpg


JAE 2017 came again and i won another trophy for Show and Shine
21231162_10159492678430107_4662868747021565449_n.jpg

21231614_10159492678750107_7180266612799919514_n.jpg


i did the big 3 Upgrade which included 70mm Cable from Engine to Chassis, Battery Earth to Chassis, Alternator to Battery and also got 4 Stinger SPV44 Batteries, 3 of which are for the Hydros

I was in talks with Gizfab to do a complete engine turbo overhaul after i purchased Dave Shaw's old Garrett GT2554R Turbo.

23844914_10159857536845107_1020070440020248450_n.jpg


So off it went to Eden to work his magic and in the process of him having the car i decided to have a boot build made up by Eden as well to house the 4 batteries and hydraulics.

32667532_10160630103455107_8926898703634006016_n.jpg


Whilst Eden had the car i decided because i have no room for my camping gear in this car i bought a Teardrop Caravan.

28056016_10160232686430107_3302110604847768161_n.jpg

27973865_10160249218050107_6923498110116607268_n.jpg

2018-02-17 11.19.38.jpg


I had this painted to match the cabriolet and graphics supplied and fitted too

2018-03-03 11.34.46.jpg

2018-03-16 11.30.56.jpg

Also bought a bike to match haha
2018-03-27 22.14.49.jpg



Eden worked his magic and i picked the car up just over a month later
31357893_10160559392175107_5948006126971781120_n.jpg

31398283_10160559392340107_719158279049052160_n.jpg

31357893_10160559392175107_5948006126971781120_n.jpg

32231200_10160606935905107_2873434808669700096_n.jpg

32684826_10160630103650107_2906897251060154368_n.jpg


Had brakes upgraded to Drilled and Grooved

24993338_10159915049250107_7447099823598401275_n.jpg
 

Attachments

  • 17630112_10158652337920107_1467606773919815033_n.jpg
    17630112_10158652337920107_1467606773919815033_n.jpg
    128.5 KB · Views: 741
OP
OP
Andy_S

Andy_S

I Love Booooooost!
Club Member
Oh and Gizfab also fitted my Towbar so i could tow the camper and i had 13pin electrics fitted to the micra and camper so it charges the battery whilst being towed

Change of Wheels came to 15" Team Dynamics in multi fitment so would fit the camper and the micra

35364038_10160742199145107_8153734754185773056_n.jpg


36342094_10160797686660107_2898622588542517248_n.jpg

36640277_10160814563310107_3473195603935100928_n.jpg

2018-06-29 20.06.32-1.jpg

2018-06-30 12.16.50.jpg


2018-06-30 12.11.37-2.jpg

2018-07-01 08.02.07.jpg
 
OP
OP
Andy_S

Andy_S

I Love Booooooost!
Club Member
I finally got round to wiring the other 3 batteries to the Hydros using 70mm Cables.

Batteries are wired + to + and - to - on each battery to keep the 12V but increase the capacity.

Hydros are connected to + on Battery #1 and - on Battery #3

2018-08-15 20.43.33.jpg

2018-08-21 19.06.11.png

2018-08-21 19.05.49.png


and that is where i am upto at the moment. I have a Wald Replica bodykit which needs test fitting and painting but thats for after JAE which is a week on Thursday where it shall be attending on the MSC stand and on the Trade Village after being invited by Nigel himself ;)
 

Attachments

  • 2018-08-15 20.43.58.jpg
    2018-08-15 20.43.58.jpg
    743.5 KB · Views: 388
OP
OP
Andy_S

Andy_S

I Love Booooooost!
Club Member
oh damn i forgot about the mapping with the new turbo haha

After I got the car back from Gizfab i took it down to Ed at Fusion to work his magic and safe to say my expectations of 150bhp were blown way out.

190.1 BHP!!!
2018-05-18 13.41.03.jpg

2018-05-18 18.23.32.jpg
2018-05-18 16.55.51-1.jpg
 
Top