• Please only use these forums for blogs, they are not a discussion forum

The Mad Yax build

Hi guys,
So after taking our 1996 Micra on 26000km to Mongolia and back on Mongol Rally 18, I'm planning to shine it up and put a bit of kick in it. https://photos.app.goo.gl/1eoujYT3sFmySdRCA
I'm hoping to get some advice on the plan off people here!

1. Replacing CG10 with CG13, keeping original CG10 gearbox
2. Custom plenum fitted to chopped stock inlet manifold. Two CG13 stock throttle bodies top entry to plenum. (Maf may be an issue here. Can an inline maf be used in intake before TBs?)
3. Lightened flywheel 6kg >3.5/4kg
4. Ta Teknix coilovers
5. 15" gold Super RS
6. Quick release clamps on roof rack
7. Custom built bomber seat
8. Momo wheel

A lot of the decisions come down to budget and a lack of GA16s available in Ireland. Looking forward to your thoughts.
 
OP
OP
Mad Yax
Hi guys,
So after taking our 1996 Micra on 26000km to Mongolia and back on Mongol Rally 18, I'm planning to shine it up and put a bit of kick in it. https://photos.app.goo.gl/1eoujYT3sFmySdRCA
I'm hoping to get some advice on the plan off people here!

1. Replacing CG10 with CG13, keeping original CG10 gearbox
2. Custom plenum fitted to chopped stock inlet manifold. Two CG13 stock throttle bodies top entry to plenum. (Maf may be an issue here. Can an inline maf be used in intake before TBs?)
3. Lightened flywheel 6kg >3.5/4kg
4. Ta Teknix coilovers
5. 15" gold Super RS
6. Quick release clamps on roof rack
7. Custom built bomber seat
8. Momo wheel

A lot of the decisions come down to budget and a lack of GA16s available in Ireland. Looking forward to your thoughts.
Save you the click
Screenshot_20181113-220505.jpeg


Sent from my SM-G920F using Micra Sports Club mobile app
 

LiamC

I've ruined my car ?
These are the shoes for her. Not 100% on how they will fit has anyone had 15x7xE20? While lowered?View attachment 60166

Sent from my SM-G920F using Micra Sports Club mobile app
Ah yeah you'll manage them lad, my new wheels will be equivalent to 7j et8 so you've half an inch of arch safety over me. Try www.willtheyfit.com to check tyre sizes you can use etc.

Based in Athlone Westmeath myself, few others around the Midlands if you're ever up for a meet

Sent from my FIG-LX1 using Micra Sports Club mobile app
 
OP
OP
Mad Yax
Ah yeah you'll manage them lad, my new wheels will be equivalent to 7j et8 so you've half an inch of arch safety over me. Try www.willtheyfit.com to check tyre sizes you can use etc.

Based in Athlone Westmeath myself, few others around the Midlands if you're ever up for a meet

Sent from my FIG-LX1 using Micra Sports Club mobile app
Ah sound. Crackin site that is. Been on to autostyling they are doing 25% off JR wheels next week so saving over 100 quid delighted. Aye that'd be a good buzz once I get her set up

Sent from my SM-G920F using Micra Sports Club mobile app
 

LiamC

I've ruined my car ?
Ah sound. Crackin site that is. Been on to autostyling they are doing 25% off JR wheels next week so saving over 100 quid delighted. Aye that'd be a good buzz once I get her set up

Sent from my SM-G920F using Micra Sports Club mobile app
Oh you're sorted so. I must make a trip up there in the next couple of weeks. Yeah sure keep us updated here and we'll organise a meet up

Sent from my FIG-LX1 using Micra Sports Club mobile app
 
OP
OP
Mad Yax
So my current set up is a facelift CG10 Gearbox. I sliced the bottom off it somewhere in Tajikistan and would be keen on replacing it while doing the CG13 swap (from facelift)
However I'm looking to keep the gears from the 1ltr to keep it responsive. The plan is to take the 1ltr gears themselves out of their housing and put them in the new one from the CG13. Hopefully this will be a straight swap with not too much to it.
 
Top