what did you do to your micra today ?

Today's tinkering.
e3fdee742dd182171b0cc838191a8971.jpg
31ad54c6359c58dd5e64c2b5062af48e.jpg
10959d6b8cff1929af1b350d2cfdc63f.jpg
904d85d1c20a7d52700e2a1998f63bb3.jpg
298dfeaa34cc924f29666cee9ab6a25f.jpg


Sent from my HTC Desire 530 using Micra Sports Club mobile app
 
Finally got around to do an oil change and change the spark plugs. I live in the city with street parking so the fact that I can't just walk outside and do it in my own driveway made me postpone the oil change a bit. It's been 3000km since I bought the car so the oil change was long overdue. Spark plugs were in decent condition actually but figured I might as well replace them.

Also started cleaning the engine bay a bit and fixed my rear mud flap with some epoxy since a piece of the plastic had ripped loose around one of the screws.
 
got the new engine into the sport+ and got it running and moving
just got to finish it tomorrow then back to welding lol ,after a small 700ish miles in the bumblebee holiday :)
and note leaving the stereo going for 6 hours pretty loud with the boot open so i have somthing to work to slightly drained the battery :p
 

Attachments

  • P27-08-17_15.20.JPG
    P27-08-17_15.20.JPG
    1.4 MB · Views: 300
  • P27-08-17_20.19.JPG
    P27-08-17_20.19.JPG
    1.5 MB · Views: 248
  • P27-08-17_15.20[01].JPG
    P27-08-17_15.20[01].JPG
    1.8 MB · Views: 285
  • P27-08-17_20.20.JPG
    P27-08-17_20.20.JPG
    1.4 MB · Views: 243
  • P27-08-17_20.19[01].JPG
    P27-08-17_20.19[01].JPG
    1.6 MB · Views: 264

SuperUno

Buy & Sell Member
Basically broke it..... clutch is slipping, oil coming out all over the place. Gearbox making horrid noises and even with a new lamda sensor the car was running soo rich it failed noise.... All in all not a great day....
 
had a flat and found a self tapper stuck in from last night
also it clicked onto 87k which means its almost done 10k within a year with me since i got with 77,940 on it, if thats sad of me to keep track
 

Attachments

  • P01-09-17_11.23.JPG
    P01-09-17_11.23.JPG
    1.5 MB · Views: 236
  • P31-08-17_20.35.JPG
    P31-08-17_20.35.JPG
    1.9 MB · Views: 256

LiamC

I've ruined my car ?
I was too busy chasing the lads around the yard to take pictures. They didn't even pull it tight though so I just cut it off with a knife. They could have at least done a good job then it would have been funny

Sent from my SM-G903F using Micra Sports Club mobile app
 
just came home ,265 or somthing like that miles back home from london from our holiday, 588miles total and 850miles within a week lol
she did 392miles and still had 1 read bar left , not bad cosidering i went through windsor to lego land, m25 at rush hour stop start and down heathrow over 4 days
bloody speed and average speed cameras tho grrrrr
P04-09-17_20.45.JPG
 
Last edited:
Had an eventful rally last weekend, lots of issues but thankfully cured the engine issue by getting a new ECU, not cheap!

Got 5th in class which was disappointing considering we won our class at this rally last year.

Anyway, to summarise, first stage I hit a large jump and sheared a front coilover, got that welded up in service after 2nd stage. 3rd stage an escort was holding us up (so we were on his arse with lights and horn), we got too close and he kicked up a lot of stones and destroyed my windscreen and headlight, as well as putting a hole in the radiator! New radiator in. Then we blew a radiator hose stage 5, probably due to us not getting it bled fully. Thennnnn stage 6 brakes went soft so had to bleed them in service. Stage 8 (final stage) our welds failed on the coilover, but we got to the end. We were very busy.

Look at the angle on the front drivers wheel!

1504881784233.jpg
1504881776868.jpg
 
well this kinda sums up what i been doing
only other thing is been looking for another micra for parts and tried to help a bloke with a k11 se who thought k11s service intervals are 20k!
shame cause his se had 41k and excpt wanting a clean looked fairly good
P11-09-17_16.07[03].JPG
P11-09-17_16.07.JPG
P11-09-17_16.08.JPG
P11-09-17_16.07[01].JPG
 
Last edited:
Welded a new rear half of the sill but felt like crap and tried to train so left it as it is
Looks rough but its made up of all 3 layers and easily kicked up on without any deformation and I still got to weld the button of the seem full and add the plate
It will look tidy when sort and be strong
 

Attachments

  • IMG_20170920_163521.jpg
    IMG_20170920_163521.jpg
    419.5 KB · Views: 210
  • IMG_20170920_175204.jpg
    IMG_20170920_175204.jpg
    498.7 KB · Views: 219
  • IMG_20170920_175211.jpg
    IMG_20170920_175211.jpg
    520.5 KB · Views: 211
My pre-inspection went well, no welding required, a bottle of hammerite k-rust to keep everything black underneath, a cv boot :cool: again!? And the noticeable change in the brake performance was a surprise,, new pads and shoes installed, though it was two mot's ago that the discs, pads and wheel cylinders were renewed and just last year for all the flexi hoses. Roll on mot number 18:). Went with all mintex this time see how they do. My brakes may have to work a bit harder now that I work at the top of a mountain :D. https://www.howmanyleft.co.uk/vehicle/nissan_micra_slx down to 525 ,, numbers are dropping fast
 
Finally got myself some roof bars! Found a complete used thule kit cheap online, so now the Micra is ready for bikes, skis and surfboards. Also took care of some more nasty heat shield rattle. Thought it was the manifold or catalytic converter heat shields and although they were rusted and loose the culprit was yet another exhaust heat shield clamp under my car. Already replaced two of them but completely missed this last bugger. Now it is as quiet as can be! Also started some grinding for the only major issue left, a nasty hole in the back of my right sill. Gonna just do a quick repair with fibreglass since I don't have a garage to weld in and welding in a shop here in Norway will cost almost as much as I paid for the car... I know this is not the best solution but winter and road salt is coming soon, so gotta close that hole up.
 
Top