Micra K12 Sport + Fog Lights

Hi all
I have a 55reg Nissan Micra Sport+ 1.2
Ive ordered some H11 bulbs for the fogs and was wondering how i could go about changing them?
Is it possible from the front or does the plastic have to be removed from behind the bumper?
All comments and suggestions much appreciated!

Thanks !
 
i had to take front bumper off completly mate, because the washer botle is in the way on the left hand side fog. so its a bumper off job! lol
 
That's why I'm still putting off changing my cracked fog lamp unit on the N/S
...don't fancy taking my bumper off LOL ^_^
 
It's only a few arch liner clips and a few on the grill and 2 bolts in either arch and its straight off :) still, it's a chew on lol
 
OP
OP
Omy

Omy

Lol yeah suppose
Alignment is slightly off on the n/s as the previous owner had a small bump so don't want to cause too much bother for myself. Might get it done by someone more professional lol
 
OP
OP
Omy

Omy

BTW anyone got any pics of their k12s with some mods?
I was wondering if anyone has modded/changed their back lights? Either completely or tinted them?
 
I have also been looking for some modded back lights, and I have found these.

http://www.crystal-eye.jp/shopbrand/012/001/X/

154066057.jpg
 

Tchaaa

Buy & Sell Member
I've replaced the foglight bulb in mine after a badger severed the bolts and blew the bulb (bloody thing!)

You can do it with the bumper on, however having done it, I would probably recommend the bumper off method as I can't imagine a bulb replacement could have been made more tedious if they'd tried.
 
OP
OP
Omy

Omy

I have also been looking for some modded back lights, and I have found these.

http://www.crystal-eye.jp/shopbrand/012/001/X/
Little different than the usual but woudnt put them on my micra :p !
Dont think they are any decent tail lights for the k12 out there

I've replaced the foglight bulb in mine after a badger severed the bolts and blew the bulb (bloody thing!)

You can do it with the bumper on, however having done it, I would probably recommend the bumper off method as I can't imagine a bulb replacement could have been made more tedious if they'd tried.

Thanks for the advice bud !
 
Top