Nissan March HK11 CVT to Manual Conversion

baguete

Site Supporter
Ok guys, i want to convert from CVT to Manual, i already read some posts here and on CMF, seems easy, change gearbox, linkage, crossmember, mounts, etc...

Saw a pic of the CVT inhibitor relay bypass on a K11, but i dont find it on the March, does anyone have a pic of it or tell me where it is?

And another thing, no one that made the conversion took any pics of the reverse/neutral switches re-wiring, what is needed to do it?

Cheers
 

frank

Club Member
you may be able to hear the relay click baguete, if you move the stick up and down to neutral to drive ?
and you will probably need the length of loom from a donor car for the neutral and reverse eh
 
OP
OP
baguete

baguete

Site Supporter
you may be able to hear the relay click baguete, if you move the stick up and down to neutral to drive ?
and you will probably need the length of loom from a donor car for the neutral and reverse eh

Did that and couldnt hear any click, even with a friend listening on the engine bay... :eek: What could be the colour of the wires?

And the March will be the donor car, will install every single part from the March on a SuperS, to keep the auto-aircon, electric mirrors, etc and have LHD and a "free" sunroof. But i have some other K11 looms, i can cut some parts from them.
 

frank

Club Member
i think you,ll find that the march loom (auto or manual) will be very different mate :eek: (single plug instead of 3 for the clocks for example ?)
 
OP
OP
baguete

baguete

Site Supporter
i think you,ll find that the march loom (auto or manual) will be very different mate :eek: (single plug instead of 3 for the clocks for example ?)

Need to check that then, still didnt stripped the March, need to remove all the stuff from the SuperS first and get it painted from red to black, then install the March stuff...

If anyone has a PDF or similar with the March wiring, can post it here please?
 
OP
OP
baguete

baguete

Site Supporter
I will ask japanese friends for it ;)

Thanks mate. Can you ask them to translate this:


06082011141_temp.jpg
 
OP
OP
baguete

baguete

Site Supporter
Already done the translation :laugh:

01 - スタータ - Starter
02 - オーディオアンプ - Audio Amplifiers
03 - ルームランプ - Room Light
04 - ストップランプ - Stop Lamp
05 - シフトロック - Shift Lock
06 - ホーン - Horn
07 - フォグランプ - Fog Light
08 - ハザードランプ - Hazard Lamp
09 - テールランプ - Tail Lamp
10 - ターンシグナル - Turn Signal
11 - メータ - Meters
12 - エンジン コントロール - Engine Control
13 - フューエルポンプ - Fuel Pump
14 - エアバック - Air Bags
15 - エアコン - Air conditioner
16 - ブロアモータ - Blower
17 - オーディオ - Audio
18 - シガライタ - Cigarette lighter
19 - ワイパ - Wiper
20 - ミラー & リヤワイパー - Mirrors and rear wiper
21 - デフォッガ - Defogger


But the March wiring diagram can be useful...
 
OP
OP
baguete

baguete

Site Supporter
Already have the translation made, used an EDM fusebox paper and cutted it to fit the JDM paper:


07082011143_temp.jpg



Just need the wiring diagram. Maybe someone on CMF could have it? :suspect:
 
how you getting on mate? I checked the march manual I was going on about and its just user manual, so no real help. let me know how you get on. Need to do same conversion. thanks
 
OP
OP
baguete

baguete

Site Supporter
Ok, manage to make some progress about the March wiring loom, already found the CVT start inhibitor and reverse/neutral switches.

This two connectors are the ones you need to "work":

IMG_0171-1.jpg



To bypass the CVT inhibitor, its just a matter of joining the two wires on this connector, make sure its thick enough:

IMG_0173-1.jpg



To enable the reverse/neutral switches, use this connector:

IMG_0172-1.jpg



Use this diagram to make the right connections:

caixacvt-interruptores.jpg



That wiring diagram is from the gearbox connector, on my pic is, front left to right on the upper line to lower line:

6 - D
5 - Ds
X
3 - Positive
X
9 - N
8 - R
7 - P

So, you just need to join the pin #3 to both switches on the manual gearbox and join each of the other wires to pin #8 and pin #9 on the auto loom, in correct order.

Hope this can be helpful.

Cheers,
baguete
 
OP
OP
baguete

baguete

Site Supporter
thx mate. could you do me a favour and write up what I need to do the conversion? much appreciated

Well, i will swap all the bits from the March to the SuperS, so 2 cars will be stripped, maybe 2 weeks to do that swap... I can update this topic as i get it going?

i think you,ll find that the march loom (auto or manual) will be very different mate :eek: (single plug instead of 3 for the clocks for example ?)

It seems to have 4 plugs. :eek: And there is no inhibit relay, its just a switch inside the auto gearbox, thats why the plug on the gearbox has thicker wires...
 
Hi Baguete,
I saw it was in 2011 but...
I'm just doing the manual conversion on my '97 March Cabrio (all mechanical is done, now I have to do the electrical).
I'm wondering if the 6-wires plug on the auto gear stick have to be modified to ?
And, is it useful to connect the neutral switch on the manual gearbox ? because the neutral is not used to start the engine I think... ?
 
Top