Shaun's Super S

[Shaun]

List of Modifications:

• Blue LED Speedo Lights
• New Fog Lights
• Open Mouth Grill
• K&N Airpan Filter / Pipe Filter / Mushroom
• Bucket Seats
• All Weather Headlight Bulbs
• Blue/White Tint Foglight Bulbs
• Blue Interior Cabin Light
• Sparco Snap on/off Kit
• Aftermarket Steering Wheel
• Flocked Plastics Metallic Blue
• Flocked Stereo Surround Metallic Blue
• Painted Speedo needles Metallic Blue
• Flocked Speedo Cluster Housing Black
• Flocked Gearbox/Handbrake Plastics
• Painted Armrest And Interior Handles Black
• Nissan Seat Belt Covers
• Lowered -35mm
• KYB Gas Shocks (all round)
• Cold Air Intake To Stock Airpan
• JBL Front Speakers
• JBL Rear 6x9's
• Mutant Subwoofer
• JVC Headunit
• 8-ball Gearknob
• Bolt On Pedal Covers
• Carmats (not really a mod but needed!)
• Aero Wiper Blades
• 15" x 6.5J Alloys Fitted 195/45/15 tyres fitted

List of Things To Do:

• Sort Out That RustBay!
• Redo Grill (as it Rusted)
• Flock The Dashboard
• Re-trim Doorcards (half Done)
• Sort Out Audio System
• Get Doors Re-hinged
• Sort Out Minor Dings Exterior
• Paint Exterior Plastics / Skirts, Arches
• Find Some Calipers For Vented Discs
• Service
• ENJOY THE MICRA!

Right as the New Blog system is confusing as hell to work with i will refer back to this Forum Style Blog:

[Manny]

List of Modifications:

• Blue LED Speedo Lights
• New Fog Lights
• Open Mouth Grill
• K&N Airpan Filter
• Bucket Seats (one installed)
• Blue Tint/White Headlight Bulbs
• Blue Tint/White Foglight Bulbs
• Blue Interior Cabin Light
• Boss Kit
• Sparco Snap on/off Kit
• Aftermarket Steering Wheel
• Painted Heater Plastics Metallic Blue
• Painted Stereo Surround Metallic Blue
• Painted Speedo needles Metallic Blue
• Painted Speedo Cluster Housing Black
• Painted Gearbox/Handbrake Plastics
• Painted Armrest And Interior Handles Black
• Nissan Seat Belt Covers
• Lowered -35mm
• KYB Gas Shocks (all round)
• Cold Air Intake To Stock Airpan
• JBL Front Speakers
• JBL Rear 6x9's
• Mutant Subwoofer
• JVC Headunit
• 8-ball Gearknob
• Bolt On Pedal Covers
• Carmats (not really a mod but needed!)
• Aero Wiper Blades
• 15" x 6.5J Alloys Fitted 195/45/15 tyres fitted

List of Things To Do:

• Sort Out That RustBay!
• Fit Other Bucket Seat
• Redo Grill (as it Rusted)
• Paint The Dashboard
• Re-trim Doorcards
• New Audio System
• Get Doors Re-hinged
• Tighten Boot Latch
• Sort Out Minor Dings Exterior
• Paint Exterior Plastics / Skirts, Arches
• Find Some Calipers For Vented Discs
• Service
• ENJOY THE MICRA!

Right as the New Blog system is confusing as hell to work with i will refer back to this Forum Style Blog:

same here i found it confusing also i given up on it.

[Shaun]

Pictures (and there is a lot) :

[Shaun]

same here i found it confusing also i given up on it.

yeah was a pain at least i can simplify things here rather than refer back to my blog post 3 on such a such date

[Shaun]

Right Some Recent Pictures:











































And... That's It! - For Now....

[Manny]

some very good mods done there. didnt know mintex did air grooved discs. did them gas shocks make alot ov difference?

[Shaun]

some very good mods done there. didnt know mintex did air grooved discs. did them gas shocks make alot ov difference?

Yes! they made a hell of a difference don't know whether it was because they were gas or just because they were nice new shocks
and need to find calipers for the discs

[superls]

good work shaun, i think you have put your rear suspension together wrong.

[Shaun]

good work shaun, i think you have put your rear suspension together wrong.

why?! is it because of the "protection kit" they sent me lol never figured out how the hell they fit! so they never went on
picture for reference:

the middle bit is no longer there, am using the old dust cover

[superls]

oh if the middle bit is no longer there its ok as its that thats wrong, look from the pic as you have put a new bump stop inside the dust cover, but if your using the old on no worries

[Shaun]

oh if the middle bit is no longer there its ok as its that thats wrong, look from the pic as you have put a new bump stop inside the dust cover, but if your using the old on no worries

well there is no bump stop there at the moment!! i know its bad but the bloody thing wouldn't go on in any direction! was a pain so its just a dust cover untill i can be bothered to do it all again!

[Badboymcra]

go and send me pics of how u put the bucket seats in m8

[Shaun]

go and send me pics of how u put the bucket seats in m8

In due time calm down the passenger seat is just bolted in at the moment soon to be welded in and weld in the drivers seat once they are done I'll let you know.

[Shaun]

Right a kind of constructive weekend! got one seat ready to be welded onto more metal to be bolted in
and some other bits that i want to leave secret for now!

[Shaun]

Pictures:
Bare Runner,


Unwanted Runner Parts,


Runners Bolted On,


Hopefully the weather is nice over the next couple of weeks

[Shaun]

First Sunny Day In A While So Decided To Get Out And Clean The Car...







As You Can See The Inside Is To Be Done Still

[Shaun]

Mckenziecz Kindly Welded On His Hard Work Of Art!


Don't They Make A Lovely Pair!

[Wheeler]

U az got a well bangin motor init blud!

No but seriously I want your car (Y'know... my birthday's coming up (in october anyway))

[Manny]

well done them seats look spot on. bet it feels more sporty and comfy now.

[R-REG-SR]

some wikid customizing i enjoyed all them pics and look after the k10 seriouslee solid jap things these

[RTLkyuubi]

Do you still have the original seats that were in? If so, how much would you sell them for?

[Shaun]

U az got a well bangin motor init blud!

No but seriously I want your car (Y'know... my birthday's coming up (in october anyway))

That would be good lol but no...

well done them seats look spot on. bet it feels more sporty and comfy now.

Actually the seats are rock solid! well hard foam but very comfy!

some wikid customizing i enjoyed all them pics and look after the k10 seriouslee solid jap things these

I will

Do you still have the original seats that were in? If so, how much would you sell them for?

I think i do but they would be utterly useless and we had to angle grind the runners off of the seats
so you would have nothing to bolt them down with

[Shaun]

Right boys and girls and children of all ages just to let you know there will be some big changes to my little black K10 on the way and with any luck should look/sound/feel good!
keep your eyes peeled - dont blink - you might miss it

shaun

[Shaun]

hey guys update time got my window winders on....
before:

after:


and anyone have a solution to my little problem it makes the car look more untidy than it already is!
ok side:

bad side:


any help appreciated thanks for looking!

[Shaun]

Hello again people.... cleaning mad again.

cleaned the missus' c3 yesterday and that was a killer but after 3 years the paint is still immaculate probably because it hardly ever gets washed and when it does i do it lol
C3:



Panit work (no Swirl marks!)


And now for my '10:

[Shaun]

Update: Bit of an up and down one really.... the exhaust snapped on the way up north the other day due to rust so am in the process of sorting that out aswell as adding the 4-2-1 manifold and removing the EGR system at the same time replacing the inlet manifold etc... that believe it or not is the good news,
Bit of a downer is i am planning on sorting out the exhaust and interior a bit more then the car will be put up for sale, if you have any questions regarding this then just PM me.

Regards
Shaun

[aLLeKs]

why do you sell that car? if you would live in Germany, I would buy your car immediately

[Wheeler]

If you're selling it for free then dibs.

[Shaun]

why do you sell that car? if you would live in Germany, I would buy your car immediately

I will be selling due to me wanting to upgrade... i would like to get a nice 1.3 K11 electric windows for 1. and 2. its a lot more you can do and buy for the K11 in my opinion, thankyou for your compliments

If you're selling it for free then dibs.

err.... no lol

[Wheeler]

Haha aww.

Well if I can get a job by the time you're selling it I'll definately be very interested

[boyracergt]

I will be selling due to me wanting to upgrade... i would like to get a nice 1.3 K11 electric windows for 1. and 2. its a lot more you can do and buy for the K11 in my opinion, thankyou for your compliments

ive been thinking the same recently modding a k10s getting harder and harder as parts become less avaliable

[Shaun]

ive been thinking the same recently modding a k10s getting harder and harder as parts become less avaliable

Yeah it's true and i found it real difficult to get a new grill and bonnet not for accident reasons god no... rust lol and poor quality painting by my own hand

[RTLkyuubi]

I think i do but they would be utterly useless and we had to angle grind the runners off of the seats
so you would have nothing to bolt them down with

Thats not a problem, the problem is that your a 3 hour drive away!

[Shaun]

Thats not a problem, the problem is that your a 3 hour drive away!

that is a shame however when i get the car sorted and back on the road i could meet you half way that would only be an hour and a half drive then

[superls]

just put a cg13 engine in it and universal electric windows, ive got a drivers side engine mounting up for grabs that lets you put the cg13 in, keeping the k10 g/box and all parts.

[Shaun]

just put a cg13 engine in it and universal electric windows, ive got a drivers side engine mounting up for grabs that lets you put the cg13 in, keeping the k10 g/box and all parts.

Would love to do this in the future... and Mr. Superls reply to my damn PM lol 4-2-1 fitting help needed

[superls]

i never got it mate, my inbox was full, its empty now

[Shaun]

i never got it mate, my inbox was full, its empty now

it's ok it's sorted now wanted to ask on how to fit the 4-2-1 but its done

[Shaun]

Update: Got Exhaust fitted pictures will follow in time, been busy started sorting out the interior
before:

after:

together:

and again:


not bad for a guy eh? lol

[Shaun]

Update! ok so the EGR system is out and im left with a few bits i dont know what to do with! also door cards are on and need a few minor adjustments like the wrinkles and the door pin hole needs to be a bit bigger but i think they look well PIMP lol pimp micra
anyways pictures!!!
firstly messy engine bay with 4-2-1 and EGR removed any help appreciated with the left over plugs from the system....

[Shaun]

now the door cars (the speakers will be covered soon)
sorry for the quality...









Thanks for looking!

[Shaun]

Update: Exhaust On Carb On (just needs adjusting) Painted The Rocker Cover
New Oil Breather And Air Filter:




Funky Sticker!


Recent Video Of It Actually Moving!!



Thanks For Looking

[RTLkyuubi]

arghhh at waisting a super s interior! I would of traded you mine and some cash.

[Shaun]

arghhh at waisting a super s interior! I would of traded you mine and some cash.

Nothing has been wasted door cards are simply covering the originals and the seats were knackered as the drivers seat had some metal digging into you as you turned corners

[pjg1979]

Top Blog Shaun, Like the paint job on the rocker cover, looks great. Also really like those pedals. The rest of the car is really smart wouldn't mind owning one.

Keep up the good work.

[Shaun]

Top Blog Shaun, Like the paint job on the rocker cover, looks great. Also really like those pedals. The rest of the car is really smart wouldn't mind owning one.

Keep up the good work.

Thanks! trying to get it running smoothly at the moment for mot but will update when its successful!

[6.5x55]

Mint car! The alloys really suit it. I learned to drive in a K10, have since owned a K11 I put 107,000 miles on and now drive a 160SR K12 - what is it about Micras ?

[Shaun]

Mint car! The alloys really suit it. I learned to drive in a K10, have since owned a K11 I put 107,000 miles on and now drive a 160SR K12 - what is it about Micras ?

Micras are awesome!
This is where it is at at the moment!
http://www.youtube.com/watch?v=xEQnR3Upywk
matt black bonnet and i look like a thug lol

[R-REG-SR]

wiked vid kept my eye on the facelift only tosee you driving in form that exact end
like the interior exterior work a lot and your speaker shelf is very pro lookin
see this runin sweet soon as!!

[karlj]

What car are the discs ment for?