Raceworx Micra Blog

[Titch]

hmmmm ill shave mi pubes aswell!! skinny naked speed driving!! Bwahahahaha :P

Thats classic, wrong but good all the same!

[tommo]

thats the last thing i wanted to hear when i looked in the thread

skinny naked speed driving

wurr

how dare you lol

[Raceworx]

you love it really dude :P

[tommo]

grow up lol

[Raceworx]

that hurts tommo

anyway.. iv fitted the altornator today and its causing me some ball ache!!!

[Raceworx]

well whilst browsing halfords for my altornator belt which they didnt have!!! i saw a few oddments and cobled them together to form an oil catch can and petrol vapour catch can.....







pritty self expanetry...how it works really :P
Noy bad for about £20

[RIK]

smart mate,very tidy

[tommo]

that hurts tommo

and so it should how dare you discuss testicles on this thread lol

as for the car, more good work my son, will be up sometime soon with dave n minty for a proper browse

[RIK]

and so it should how dare you discuss testicles on this thread lol

cos he needs very big ones to drive that thing

[tommo]

lol it'll be a doddle, ive seen the way he drives his old dears vtec accord

[tommo]

just to add he drives it very sensibly if your reading this Mrs C lol

[Raceworx]

lol yes... yes i do

[chie]

lol i saw you in the astra yesterday :P

[Raceworx]

YEAH YOU ALSO SAW THE CAR

[gartracs2]

Hi matey Ive been thinking of this mod my self for a few years now, Im gonna do it when I sell my R except im gonna prob throw in 25 BHP of nos too.
I work for Middlehurst in the GTR section and Im willing to help you with any aspect of the job if you ever need it, although it looks pretty much like you know your stuff
Id like to know how you fitted the engine in place and when you get your shafts made up can you supply me a spec of the length etc so I could get sum made up for my K11 project.
Have you used a hybrid ALmera or Sunny front crossmember? also what hubs and suspension you using? Any info would be greatly appreciated.
Regards
Ben Johnson
Middlehurst

[Raceworx]

how do mate.. if ya want to have a chat about stuff add me to msn if you have it Drifterx_uk@hotmail .com if not send me an e-mail

[gartracs2]

Hi me old matey I couldnt add you on msn it says it isnt a valid address. God knows why like lol. Im thinking of Breaking the R if I cant sell it in which case I`ll put in the SR20 DET with a LSD box from a Sentra SER think it will go fairly well. 300 BHP in a fag packet lol..

[Alienfish360]

Are you removing the space in the address?

[Dave Bull]

300 BHP in a fag packet lol..

Hmmmmm...wonder what that feels like then eh?

LOL!!!!

Hey Raceworx...when are we getting the ######s both on the track then and pick on some Hondas?

P.S. My 24.5" slicks don't fit...looks like I'll be using the 22's!

Bollox!

Dave

[Raceworx]

woop new boarder SP-B arrived today!!






its so comfey and tighter than a scotsmans wallet!!

[RIK]

well your wallet aint tight! lol

[Raceworx]

wel im not scotish and theres no point keeping it closed cos theres nothing in there!!

[tajones]

Wot ypu doin about the battery. Put mine in the boot to free up space for the air filter. Also wot fuel pump are you using. I'm gonna try and use the one that came with the engine.

[Raceworx]

battery is already in the boot has been since it was a 1.3.. fuel pump ios 1.3 at the mo just cos its not moving just ideling..

[mike]

Speaking to one of the guys that rallies k11's. I've been informed that the fuel pump off the k11 is the same as the one used on primera's and that the only difference is that primera's use a more free flowing fuel filter.

Mike

[Dave Bull]

That's correct...the Micra shares the same pump part no' as the Primera GT!

[Raceworx]

well whilst im waiting to get info on the ECU i started to look at a cold air intake so purchased a setup for a 200SX of e-bay for £30 trouble is the top hat that was sent doesnt fit but were resolving that and i had to buy a nice 90deg bend but other than that looks a good fit and is right where the old cold air feed is!

[K11_Dave]

Did you manage to sort out the wiring from those 3 blocks then?

[Titch]

Looking good man, round Nats and then shafts and thats it!

[Dave Bull]

Right OK...I found out the pins differences for you...!

Almera GTI...
CAM/CRANK Position Sensors...pins 31 & 40
FUEL PUMP RELAY pin 106

GTiR...
CAM/CRANK Position Sensors pins 22 & 30
FUEL PUMP RELAY pin 104

Swap these about and you should be good to go!

These are the only PIN differences between the 2 ECU's!

Hope this helps!

Dave

[Raceworx]

so do i swap 31 to 22 and 40 to 30

104-106 is obviouse just abit confussed lol

[Dave Bull]

Yes, that's exactly what you do!

[Raceworx]

cheers dude ill have a crack at it

[Swiper]

i'm breaking a super s. if you need a non nats loom then you can have mine for nothing if you remove it yourself. don't know if this helps.

[Raceworx]

no thats no use to me mate cheers for the offer im saving up now for a full stand alone DTA engine managment system for her.... iv got a freind who can fit and map it for just under £1K...

[Raceworx]

Engine mangment is now sorted

im getting a DTA full stand alone. with mapping and a loom for it for just under £1K.. cheap i know..the best thing is this guy is a specialist who works form his garage.. when i turned up he was making an RB26 inlet manifold using a veilside forged plenum... he was flow bench testing scooby heads for scooby clinics new drag car.. there were two RB26 heads lying there from RK tuning that were being developed by himslef.. he also does all the head work for whifbitz... so im in safe hands i think i wish i had half the guys knowledge!!

Also he got out a set of touring car SR20 spec sllid throttle assembiles from the aactual nissan touring car setup the inlet was running an 8 injector setup!!! iv not seen so much cumshot worthy stuff in a single garage!! aswell as a full cosworth flow bench.

the ECU :-
http://www.dtafast.co.uk/

[richmicratwista]

cool man whens the expected finish date then pal

[gartracs2]

Your Micra is looking fantastic, Its very neat and look almost factory IMO. Love the paint job on the rocker cover im very impressed mate. I have started to break my GTIR as I cant sell it lol, so its going to be a definate SR20 DET in a K11 but my K11 will be an old U0 series round about an N plate as theyre cheap as chips to get hold of.
I really could do with the info on how exactly you managed to fit the DE engine as there really isnt much difference in terms of the engine mountings locations they shoud be the same tapped holes in the blocks. I expect im going to have to cut out the bulkhead to accomodate the huge plenum on the reverse of the DET engine that isnt a problem though I will enjoy fabricating a new bulkhead.
Can you please Email me or PM me if your up for sharign your knowledge? Then I have every chance of getting this K11 Turbo to Santa Pod by possibly July 06. Thanks matey
Ben
MidMo

[Raceworx]

i carnt PM you mate as your not a member but add me to MSN if ya want to discuss anything Drifterx_uk @ homtail.com

remove the spaces

[gartracs2]

okay matey will do

[Raceworx]

well the header arrived today... pics dont really do it justice... all for only £100 + £30 shipping form the states..

[Titch]

Looking good man!! lol

[Speedle]

very impressive motor that some very good ideas going on look forward to seeing it completed

[Dr Zoidberg]

very tastey

[micra man]

Very nice!!! Thats a work of art in itself.

[Davey C]

£100 odd pounds is very cheap how did you manage that? is it SS auto chrome? hotshots or another?

[Titch]

Looks like the Hotshot one, have seen the manifold from Hotshot before and it looks similar.

[SR_Micra_Boy]

I think considering the price its an ssautochrome jobbie, very nice! Im after one for the almera soon

[Raceworx]

its an ssautochrome one..

[Swiper]

looks like you've had christmas early this year! lol. are those 17" speedlines in the back ground for the micra?