Search results

  1. boyracergt

    what did you do to your micra today ?

    sorned it :( and convinced myself its got to go :( :(
  2. boyracergt

    13" alloys and lots of K10 parts.

    sorry mate even if i was they wouldnt all fit in my mx5 :doh:
  3. boyracergt

    13" alloys and lots of K10 parts.

    BUMP open to offers
  4. boyracergt

    The V8 Retired For a Rebuild.

    the vw ones fit on the front fine but would need a 5mm spacer on the back to clear the centre bore..
  5. boyracergt

    Which is faster? A 1.0 K10 or a 1.0 K11?

    The later k10 1.0s had 55bhp which is the same as the k11 I think the amount of torque was the same too factor in the fact my mid spec 10 weighs 680kg and a equivalent k11 is about 750kg means theoretically the 10 would be faster accelerating. Although in real life I doubt there would be much...
  6. boyracergt

    13" alloys and lots of K10 parts.

    Unfortunately the times come to sell one of my cars so the ten has to go before i sell it i need to clear out all the spares first. all parts marked with (*) came off the old engine in my 92 1.0 with 76k and where all working fine prior to removal. Due to lack of time all parts are offered...
  7. boyracergt

    wheel nuts and spacers.

    ive been offered some cheap alloys for the 10 but the centre bore is slightly to small looking at it if i put 5mm spacers on they should then sit fine the problem being that the rear studs are very short and the nuts dont go all the way on. there only about one thread short would it be safe to...
  8. boyracergt

    MA12 tuning

    if you can weld you could knock up a manifold and stick some cbr600 carbs on it. theres not really much out there for k10s these days unless you diy lol
  9. boyracergt

    k10 super s clocks.

    as per title must be working inc rev counter. let me know.
  10. boyracergt

    Dattosan Machi Suzuki twincam 4wd project pg22

    looking good how easy was it to fit the 5 seats? any modding required? might have to nick the ones in mine whilst its off the road lol
  11. boyracergt

    A lot of smoke

    should be about 850rpm iirc
  12. boyracergt

    A lot of smoke

    Karl all ma10s do this when left water lays in the exhaust and the steams it evaporating a good run should clear it
  13. boyracergt

    micra to mx-5 engine conversion?

    owning both a micra and a mx5 id say it would be a mission. mounting the rear suspension would be a massive job in it self and also you would probably need to shorten the prop and ppf. theres also the fact the engines are really quite bulky meaning it might not fit in the bay and even if it did...
  14. boyracergt

    Brighton Marina Meet - 6th February 2011 - Top floor of the Multi Storey

    Will - Will930 Eliot - Eliot Chris - Hoodedreeper Martin - martboy21 Scopez - tristan Noddie- ed boyracergt-Ash
  15. boyracergt

    Brighton Marina Meet - 6th February 2011 - Top floor of the Multi Storey

    hopefully it will be dry enough for me to wash the car tommorrow....it hasent been washed since december......2009 :doh: and for people who dont know ill be in a very scruffy 10 lol
  16. boyracergt

    Brighton Marina Meet - 6th February 2011 - Top floor of the Multi Storey

    1. Noddie 2. Paul 3. Josh 4. Will 5. James 6. Shaun 7. Chris aka Hoodedreeper 8. r-reg-sr 09. keith hopefully if i can convinse the lady 10. markbognor 11. Aldodo 12. Jono 13. Ben 14. wrighty (james) 15. jerry3167 - 350Z 16. karl 17.Boyracer
  17. boyracergt

    Guess The Car?

    A tatra?
  18. boyracergt

    Brighton Marina Meet - 6th February 2011 - Top floor of the Multi Storey

    I will be coming from eastbourne(ish)
  19. boyracergt

    squiggles

    well to update this neighbour dropped it off late xmas eve with new mot and welding done :laugh: :p unfortunately due to swinton wanting £190 to insure it for the final month of my policy i had to wait untill today when my policy finshed to insure it! my friends been borrowing it occasionally...
Back
Top