Forum: K11 General Discussion

Hi, As title suggests, I need somewelding work done on my exhaust, and I don't have the equipment to do it, if anyone wants to earn some money for just a couple of minutes work, please get in touch, I'm absolutely desperate! Thanks

Hi guys, new here. I have a k11 runabout which has been sorn for 8 months as I didn't need it. I've decided to get it MOT'd as I will be using it again soon. As I was sorting the melted headlight connector out, I noticed the brake fluid cap is missing(must've been like it since I bought the...

for sale if anyone want some :grinning: http://www.almeraownersclub.com/showthread.php?t=34498

On a 14" rim what size tyre would you roll on. ? 195-60-14 185-60-14 what are you running.. Thanks

hi i removed the front panel from the dashboard to get into radio. i checked the wiring and all looks ok, i didnt remove the wiring plugs from radio because i dont have the radio code. is there anything else to check regarding the rear speaker problem? regarding boot release... is it...

Hi there, The little clock below the temperature guage on my dash wont keep the right time, I set it to the right time on a few occasions, and by the next day it is up to an hour (or more) slow! I recently had to replace a couple of the little bulbs in the dash and had a look to see if it ran off...

WANTED!!!!! TOYOTA CELICA/MR2/CARINA-GTi WITH THE 3SGE 2.0 ENGINE IN GOOD WORKING ORDER. CHEAP SPARES OR REPAIRS. Please if someone knows if anyone is selling a 3SGE Engine for cheap?! Cheers

hi i noticed when checking the air con its leaking at bottom right hand side and dont think it can be repaired! this was noticed when i tried to top up air con with the canister :( regards me

Hi, just wondering where everyone buys their tyres from, I've been looking around for new ones for a set of 13" alloys I've just gotten hold of from JoelH, 175 width and 13" diameter, profile I'm not too fussed on, anything from 45 to 60, cheapest in the fast fit sector is like £60 new. This...

where would one go to get a new key fob for central locking and metal key for the locks. is nissan and there £200 price tag the only place? thanks

Ok for you experts out there ..... i recently got myself electric windows with loom, side panels, buttons e.t.c... my car is a 1995 (M) reg 1.0L... now will this kit connect up to the loom to power the windows? cos when i had a look today with alot of trouble trying to poke my fingers around in the...

Hi, My daughter's little roller skate has a problem with the heater fan. It works at full blast (4th click on the rotary control I think) but not at all on the other lesser settings. Any ideas? Cheers

3000 rpm doing 60mph ?instead of 70 mph at 3k revs means its a 1.0 ltr gearbox? i read a thread mentioning this who was it now?? any ho this is what my sr is doing (3k revs 60 mph) and i have come across a receipt saying gear box changed. did they fling a 1 litre gear box in...

Im going to be putting in a 1.3L into my micra soon to use on trackdays and on the road, but i cant decide wether to use the lower ratio 1.0L gearbox or a 1.3L gearbox? Any ideas? Adam

this glue i used to bond back the window glass to the plastic clip holders(on the runner) seems to be good- 24 hr's later the window is winding up and down good and true (wont be doing any winding when the freeze is on at least untill driving for 10 mins to vibrate the ice bond loose (window...

anyone has bought any cheap kit from ebay? im talking about less than 30euros (full kit 55w with ballasts.)

need a k11 98 backbox has to be ready to be bolted on staight fit need one asap thanks only if you are near glasgow area cheerz (Y)

hi how do i remove original nissan radio without breaking the plastic cos i dont see any holes for removing. the reason i ask is my original rear speakers are not working and on the radio it does show any rear or fade option on the mradio menu for testing. so i need to check wiring etc... to...

Hey guys i got my first car (micra mauritius 1.0 ltr ) not sure if any of you would recommend getting this model but i got it cheap and its mot'd until september and a lady owner has taken care of it for the last 10 years. so all i was wondering is there any tips you guys can give me or any...

hi there, does anyone know where i can get hold of a cheap standard......maybe not standard...back box cos mine is blowing alot out of the bottom of it. any ideas? its a p reg 96/97 k11? cheers.

Like the post title states.. my lil micra is cold .. not all the time only when driving.. and out here in wales it does get quite cold at night. the problem is this. when stationary it takes around 5-10 minutes to get hot... nice n cosy but soon as i pull away within 30 seconds the heater is...

Ok guys, i got hold of myself a rear Facelift spoiler, good condition just needs painting and the 2 bolts are present but any ideas on how i can get to fit the spoiler, i.e. where do i drill and measure e.t.c. Pic Below of spoiler.. ...

As the title say can you change a head gaskets with the engine still in the car i think iv ask on here befor but i anit been on for a long time and i cant find the thread so i ask again ?? many thanks daniel :)

I know on some earlier K11 the rear seat can be lifted up and fold down the back.On my facelift 2000 Micra there are 3 seat belts on the rear seat(it is in one peace) and it is impossible to lift it up,can just fold the back. Is this the case of all facelift Micras? How to remove it if I need...

...on all k11's. e.g. are the fixing points in the same place to mount to the regulator regardless of manual or electric?any help much appreciated, ta

my others halfs micra has a battery issue at the moment its so flat i cannot unlock it using the cnetral locking. ive had a quick look round it but as it was raining didnt spend to long. how do i open the doors using the key?? did a quick search on the forum but couldnt come up with anything